Installation Of The Wall Switch - Steren SWI-600 Instruction Manual

To start the installation of the wall switch, is necessary that you have a back box.
1.- Locates the energy wire (*1) and put it on the hole marked with number.
2.- Locates the neutral wire (*2) and put it on the hole marked with number 0 o la letra L.
3.- Screw them firmly, in order to have a good contact and avoid their detachment.
4.- Fasten the switch plaque on the back box.
5.- Place the plastic plaque over the switches.
*1 Line wire
*2 Return to lamp wire (bulb light)
8

Installation of the wall switch