Steren SWI-600 Instruction Manual page 27

1.- On / Off switch
Power on or power off the connected device to the wall switch.
2.- Indicating LED
Light on when the wall switch is in learning process.
3.- Learning button
Allow one to enter to learning mode on the remote control model SWI-600 (remote control
sold separately).
4.- Selection buttons
Programmed buttons to power on or power off the connected devices onto the wall switch
(SWI-6100 or SWI-620) (wall switch sold separately).
5.- Telescopic antenna
Send signal from remote control to wall switch (models SWI-610 and/or SWI-620) (wall
switch sold separately).
11