Steren RM-010 - Universal Remote Control Manual

Also See for RM-010:

Instruction manual (2 pages)

Table of Contents

Contents

1 CAUTIONS
2 HIGHLIGHTS
3 CONTROLS
4 BATTERY INSTALLATION
5 INSTRUCTIONS
6 SPECIFICATIONS
7 Documents / Resources
- 7.1 Download manual

Steren RM-010 - Universal Remote Control Manual

CAUTIONS

Do not try to open the device, may cause damages and warranty will be void.
Do not expose to extreme temperatures.
Avoid dropping the unit as this may cause damage.
Do not use solvents or other chemicals to clean the exterior of the device.

HIGHLIGHTS

The universal TV remote control has a compact design, perfect for an easy handle. It is exclusive for TV, offering you the basic functions such as: on / off, volume, channel set, video input, and mute.

Includes great preprogrammed range of codes for most popular brands in the market.

Manufactured in high resistant black plastic.

Easy to set
For TV only
8 keys

CONTROLS

Power Button.
VOL +/-: adjust volume.
CH +/-: change channel.
Mute button.
LED: turn on when you press the buttons and flashes in the programming process.
SET: programing key.
A/V: select the video input source.
Battery compartment.

BATTERY INSTALLATION

Open the battery cover, put in two new AAA alkaline batteries according to the "+/-"symbol inside the battery pack as shown in the figure.

INSTRUCTIONS

There are two setup methods for the remote controller, please choose anyone.
Do not exceed more than 10 seconds between each step. Otherwise, the remote control leave the program mode and you must start again.

AUTOMATICALLY

Manually turn your TV on. Aim the remote control directly at the TV, press and hold "SET" key until the indicator light is on.
Now press POWER key once, the indicator flashes and the remote control enters to auto search applicable model mode. Care shall be taken to note any change in TV volume. If a change occurs, press any key on the remote control to lock up the code, with the indicator illuminating.
Testing the effectiveness of remote control keys (except the Power, Volume+ and Volume - keys). If the key is effective, press SET key once. The indicator light will go out and the search for code is complete. If the key doesn't work correctly repeat step 2.

MANUAL

Manually switch on the TV set, and aim the remote control at the TV set.
Aim the remote control directly at the TV, press and hold "SET" key until the indicator light is on.
Press the VOLUME+ key and see whether a volume function works on the TV screen.
Testing the effectiveness of remote control keys (except the Power, Volume+ and Volume - keys). If the key is effective, press SET key once. The indicator light will go out and the search for code is complete.

caution If the remote control buttons do not work, may be because your TV does not have that function. Check your TV's instruction manual.

While changing the batteries, do not press any button to avoid the remote control to lose its programming. Once the batteries are back on, operate the remote normally.
The search process depends of your TV model, please be patient because it can take up to 20 minutes. All brands mentioned are trademark.
Admiral, Aiko, Akai, AIWA, AOC, Audiovox, BENQ, Broksonic, Carnivale, Carver, CAIHONG, Citizen, Curtis Mathes, Daewoo, Emerson, Fisher, FUJITSU, GE, Goldstar, Herman, Hitachi, Infinity, JBL, JC Penny, JVC, LG, Majestic, Marantz, Matsui, Matsushita, Memorex, MGA, Mitsubishi, Mitsui, Motorola, Multivision, NEC, Nikko, Nikon, Optimus, Optonica, Panasonic, Penney, Philco, Phillips, Pioneer, Proscan, Radio shack, RCA, RIZHI, Samsung, SANYO, Sansei, Sansui, Sanyo, Scoth, Scott, Sears, Sharp, Shancha, Sherwood, Sony, Supre-Macy, Technics, Technika, Telefunken, Toshiba, Victor, VIZIO, Yamaha, Zenith, Zonda.

SPECIFICATIONS

Input: 3V (2xAAA)
Product: Universal MINI TV remote control
Part number: RM-010
Brand: Steren
Product design and specifications are subject to change without notice.