Changing the current speed to 2Gbps for the FC mezzanine card in the CPU Blade installed in the
blade slot 2 and 5 in the Blade Enclosure
Command
Displayed Setting
user> ss 1 2 2
user> ss 1 5 2
user> ss 2 2 2
user> ss 2 5 2
user> ap
Changing all port speeds to 2Gbps
Command
Displayed Setting
user> ssa 2
user> ap
Description
Change the speed of FC1 port 2 to 2Gbps
Change the speed of FC1 port 5 to 2Gbps
Change the speed of FC2 port 2 to 2Gbps
Change the speed of FC2 port 5 to 2Gbps
Enable and store the new setting
Description
Change all port speeds to 2Gbps
Enable and store the new setting
(English)
39