Connecting An Rca Audio/Video Input Cable; Using The Assemble Edit Function; Recording From Another Vcr Or Camcorder - Samsung DVD-V6500 Instruction Manual

00114A DVD-V6500/XSA-GB3 11/21/02 1:53 PM
VCR

Connecting an RCA Audio/Video Input Cable

GB
1
3
3
38
Page 38
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples: You wish to copy a video cassette with the help of a
second VCR (see page 39).
You wish to play back and/or copy pictures taken
with a camcorder (see page 39).
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1 Connect one end of the RCA audio/video cable into the VIDEO
socket on the Rear of the DVD-VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3 Connect one end of the RCA audio cable into the AUDIO sockets
on the Rear of the DVD-VCR.
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).

Using the Assemble Edit Function

This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
1 Insert the cassette to be edited in your DVD-VCR.
2
Press the ll button to start playback.
3 When you reach the position from which you wish to start the new
recording, press the ll button.
4
Press the F.ADV/STEP ( ) button again as often as necessary
to advance frame by frame, until the exact recording position is
located.
5 While the DVD-VCR is in still mode, hold the REC button (
down for a while to activate the Assemble Edit function.
Result: Record symbol flashes in the display.
6
Select the source from which you wish to record by pressing:
The PROG( or ) buttons for television channels
The INPUT SEL. button for the LINE input sources
7
Press the ll button to start recording.
8
When you have finished recording, press .

Recording from Another VCR or Camcorder

You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1
Connect the DVD-VCR, fromwhich the cassette is to be copied, to
the appropriate RCA audio and video input connectors on the rear
of your DVD-VCR, as indicated on page 12.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR: LINE IN for the RCA input
5
Start playing back the cassette to be copied.
6 Hold REC ( ) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press on bothVCR and
DVD-VCR.
If you wish to view the cassette being copied:
Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
VCR
GB
4
2
5
)
VCR
2
7
6
39