Table of Contents
Advertisement
Rear panel connectors
1
2
1.
DC power connector. Insert the power adapter into this port.
•
•
•
2.
USB 3.0 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.0 / 2.0
devices.
•
•
•
3.
HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and other protected
content.
4.
DisplayPort. This port is for DisplayPort-compatiable devices.
5.
LAN (RJ-45) ports. These ports allow Gigabit connection to a Local
Area Network (LAN) through a network hub.
Chapter 1: Product introduction
E11582_Q170T_UM.indb 6
3
4
It supports both 19V and 12V DC input.
The power adapter is purchased separately.
Use the appropriate DC power adapter for the following scenarios:
-
Use a 90W adapter when a 35W CPU is installed on the system.
-
Use a 120W adapter when using your system with an LVDS panel.
-
U se a high-rated adapter (above 90W) when a high-rated CPU (45W or higher
CPU) is installed on the system.
USB 3.0 devices can only be used for data storage.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance from your USB 3.0 devices.
Due to the design of the Intel
®
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
5
2
100 series chipset, all USB devices connected to the
6
7
Activity Link
Speed
LED
LED
LAN port
1-6
2016-05-05 10:16:52
Advertisement
Table of Contents
