Table of Contents
Advertisement
DVD
Setting Up the Audio Options
GB
1
MAIN MENU
2
DVD
DVD
VCR
Option
Language
3
Program
Clock
Install
Exit
DVD SETUP
4
RETURN
➛!!!❿
ENTER
$❷!!
5
DVD SETUP
Disc Menu
English
Audio
English
Subtitle
Automatic
Parental
Unlocked
Audio Options
Display Options
RETURN
$ ❷!!!!
ENTER
AUDIO OPTIONS
Dolby Digital Output
PCM
MPEG-2 Digital Out
➛ ➛ ❿ ❿
PCM
DTS
Off
Dynamic Compression
On
RETURN
$❷
\
48
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
or ➛, ❿ buttons to select the DVD
Press the corresponding
,
$
❷
option.
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
Use the
or
buttons to select Audio Options. Then press the
$
❷
ENTER button.
Use the
or
buttons to select the desired item. Then press the
$
❷
➛ or ❿ buttons.
• Dolby Digital Out
PCM : Converts to PCM(2CH) audio.Select PCM when
using the Analog Audio Outputs.
Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
NOTE :
Be sure to select the correct Digital Output or
no audio will be heard.
• MPEG-2 Digital Out
PCM : Converts to PCM(2CH) audio. Select PCM when using the
Analog Audio Outputs.
Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH). Select Bitstream when using
the DigitalAudio Output.
• DTS
Off : Doesn't output digital signal.
On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
• Dynamic Compression
On : To select dynamic compression..
Off : To select the standard range.
• How to make the SETUP MENU disappear or return
to menu screen during set up: Press RETURN button.
• Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
• "DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Setting Up the Display Options
1
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
,
or ➛, ❿ buttons to select the DVD
$
❷
option.
3
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
4
Use the
or
buttons to select Display Options.
$
❷
Then press the ENTER button.
5
Use the
or
buttons to select the desired item.
$
❷
Then press the ➛ or ❿ buttons or then press the ENTER button.
Use the
or
buttons to select the desired item.
$
❷
Then press the ENTER button.
• TV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
4:3 Letter Box : Select when you want to see the total 16:9
ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars
will appear at the top and bottom of the screen.
4:3 Pan-Scan : Select this for conventional size TVs when you
want to see the central portion of the 16:9
screen. (Extreme left and right side of movie
picture will be cut off.)
16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
• Black Level
Adjusts the brightness of the screen.
• Quasi-PAL
Depending on a disc, you can play a NTSC DVD disc by
Quasi-PAL mode.
• DVD Out
Component : Sends COMPONENT signal (Y, Pb, Pr) to the
component video out JACK.
S-Video : Sends S-VIDEO signal to the S-JACK.
• How to make the SETUP MENU disappear or return to
menu screen during set up: Press the RETURN button.
DVD
GB
MAIN MENU
DVD
DVD
VCR
Option
Language
Program
Clock
Install
Exit
DVD SETUP
RETURN
➛!!!❿
ENTER
$❷!!
DVD SETUP
Disc Menu
English
Audio
English
Subtitle
Automatic
Parental
Unlocked
Audio Options
Display Options
RETURN
$ ❷!!!!
ENTER
DISPLAY OPTIONS
TV Aspect
4:3 L-Box
Black Level
Low
Quasi-PAL
Off
DVD Out
Component
RETURN
$❷
49
Advertisement
Table of Contents
