Displaying/Hiding On-Screen Information; Selecting The Recording Speed; Protecting A Recorded Cassette; Recording A Programme Immediately - Samsung DVD-V17000 Instruction Manual

VCR

Displaying/Hiding On-Screen Information

GB
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, MAIN MENU and
MAIN MENU
Timer functions, which cannot be hidden).
DVD VCR VCR Option Language
1
Program Clock Install Exit
VCR FUNCTION SETUP
RETURN ➛!!!❿ ENTER
"❷!!
2
3
VCR FUNCTION SETUP
Tape Select E180
4
Repeat Play Off
On
OSD ➛ ❿ On
Off
5
RETURN " ❷
6
VCR

Selecting the Recording Speed

You can record a cassette at two different speeds:
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
In Long Play modes:
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
To record a cassette...
In standard play mode
In long play mode
28
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
Press the corresponding , or ➛, ❿ buttons to select the
" ❷
option.
VCR FUNCTION SETUP
Press the ENTER button to select this option.
Result: The menu is displayed.
VCR FUNCTION SETUP
Press the corresponding or buttons, until the OSD option is
" ❷
selected.
Press ➛ or ❿, until...
To...
Display on-screen information ON is displayed.
Hide on-screen information OFF is displayed.
On completion, press RETURN twice to exit the menu.
SP (Standard Play)
LP (Long Play)
Each cassette lasts twice as long
The recording is of a slightly lower quality
Press the SPEED button on the
remote control, until...
SP is displayed.
LP is displayed.

Protecting a Recorded Cassette

Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
2
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.

Recording a Programme Immediately

Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 19 and 20.
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
Insert the cassette on which the programme is to be recorded, with
the window visible and the safety tab intact or the opening covered
with adhesive tape.
Result: The DVD-VCR is switched on automatically.
4
Select:
The station to be recorded using the PROG/TRK (" or ❷)
buttons
or
The LINE source using the INPUT SEL. button for a satellite
tuner or external video source
Result: The station number is displayed and the programme
can be seen on the television.
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
6
Hold REC ( ) down for a while to start recording.
Result: The record indicator appears on the television and DVD-
VCR display. An index is recorded on the tape (see page
36).
7
To stop recording, press once.
If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette's
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
If you reach the end of the tape while recording, the
cassette rewinds automatically.
VCR
GB
1
VCR
0
ANGLE AUDIO
4
4
6
5
7
29