Displaying/Hiding On-Screen Information; Selecting The Recording Speed; Protecting A Recorded Cassette; Recording A Programme Immediately - Samsung CHT-350 Instruction Manual

VCR

Displaying/Hiding On-Screen Information

GB
MAIN MENU
VCR FUNCTION SETUP
➛¤¤¤❿
RETURN œ❷¤¤ ENTER
VCR FUNCTION SETUP
Tape Select E180
Repeat Play Off
On
OSD ➛ ❿ On
Off
RETURN œ ❷
VCR

Selecting the Recording Speed

Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
28
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, MAIN MENU and
Timer functions, which cannot be hidden).
1
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding œ , ❷
VCR FUNCTION SETUP option.
3
Press the ENTER button to select this option.
Result: The VCR FUNCTION SETUP menu is displayed.
4 Press the corresponding or buttons, until the
œ ❷
selected.
Press ➛ or ❿, until...
5 To...
Display on-screen information is displayed.
ON
Hide on-screen information is displayed.
OFF
6 On completion, press RETURN twice to exit the menu.
You can record a cassette at two different speeds:
SP (Standard Play)
LP (Long Play)
In Long Play modes:
Each cassette lasts twice as long
The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.

Protecting a Recorded Cassette

Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
2
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.

Recording a Programme Immediately

OSD option is
Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 19 and 20.
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
Insert the cassette on which the programme is to be recorded, with
the window visible and the safety tab intact or the opening covered
with adhesive tape.
Result: The DVD-VCR is switched on automatically.
4
Select:
The station to be recorded using the PROG/TRK (œ or ❷)
buttons
or
The LINE source using the INPUT button for a satellite tuner
or external video source
Result: The station number is displayed and the programme
can be seen on the television.
5 Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
6
Hold REC ( ) down for a while to start recording.
Result: The record indicator appears on the television and DVD-
VCR display. An index is recorded on the tape (see page
36).
7 To stop recording, press
If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette's
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
If you reach the end of the tape while recording, the
cassette rewinds automatically.
once.
VCR
GB
1
VCR
4
4
6
5
7
29