Displaying/Hiding On-Screen Information; Selecting The Recording Speed; Protecting A Recorded Cassette; Connecting An Rca Audio/Video Input Cable - Samsung DVD-V52K Instruction Manual

00046M DVD-V52K/XSG-GB2 11/9/02 11:10 AM
VCR

Displaying/Hiding On-Screen Information

GB
MAIN MENU
VCR FUNCTION SETUP
RETURN ENTER
VCR FUNCTION SETUP
Tape Select E 1 8 0
Repeat Play O f f
On
OSD O n
Off
RETURN
VCR

Selecting the Recording Speed

Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
18
Page 18
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, MAIN MENU which cannot be
hidden).
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2
Press the corresponding , or , buttons to select the
V C R option.
3 Press the ENTER button to select this option.
Result: The VCR FUNCTION SETUP menu is displayed.
4
Press the corresponding or buttons, until the cursor is placed
on the O S D option.
5 To... Press or , until...
Display on-screen information O N is displayed.
Hide on-screen information O F F is displayed.
6
On completion, press RETURN twice to exit the menu.
You can record a cassette at two different speeds:
SP (Standard Play)
LP (Long Play)
In Long Play modes:
Each cassette lasts twice as long
The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode S P is displayed.
In long play mode L P is displayed.

Protecting a Recorded Cassette

Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
2 To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.

Connecting an RCA Audio/Video Input Cable

You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples: You wish to copy a video cassette with the help of a
second VCR (see page 20).
You wish to play back and/or copy pictures taken
with a camcorder (see page 20).
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1 Connect one end of the RCA audio/video cable into the VIDEO
socket on the Rear of the DVD-VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3 Connect one end of the RCA audio cable into the AUDIO sockets
on the Rear of the DVD-VCR.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or sound
system).
VCR
GB
1
VCR
1
3
19