Table of Contents
Advertisement
Operating the product
F2
F1
Changing the speed and temperature
settings for auxiliary functions
Depending on the step the programme has
reached, you may cancel or activate the
auxiliary functions; see, "Auxiliary function
selection".
You may also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
Adding or taking out laundry
1. Press the Start / Pause / Cancel button to
switch the machine to pause mode. The
programme follow-up light of the relevant
step during which the machine was
switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out
the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions,
temperature and speed settings if
necessary.
6. Press Start / Pause / Cancel button to start
the machine.
C
The loading door will not open if the
water temperature in the machine is
high or the water level is above the
door opening.
30 / EN
F3
F4
5.17 Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
C
You can switch on and off the machine
with On / Off button when the Child
Lock is active. When you switch on the
machine again, programme will resume
from where it has stopped.
To activate the Child Lock:
Press and hold 2
and 4
nd
buttons for 3 seconds. "Con" appears on the
display.
C
Same phrase will appear on the display
if you press any button when Child
Lock is enabled.
To deactivate the Child Lock:
Press and hold 2
and 4
nd
buttons for 3 seconds. "COFF" appears on the
display.
C
Do not forget to disable the child
lock at the end of the programme if
it was enabled before. Otherwise,
machine will not allow to select a new
programme.
Auxiliary Function
th
Auxiliary Function
th
Washing Machine /User's Manual
Advertisement
Table of Contents
