Choosing A Connection - Samsung DVD-S1000 User Manual

DVD-S1000/00102B-1 8/9/02 10:46 AM Page 12

Choosing a Connection

The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner's manual of the additional components you are connecting for
more information on those particular components.
Connection to an Audio System
Method 1
2ch Amplifier
Audio Input Jacks
R L
ANALOG AUDIO OUT
R2
L2
L1
R1
Analog Audio Out
12
Method 2
AUDIO
Dolby Digital Decoder
Digital Audio Input Jacks
OR
DVD
Digital Audio Out
Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1
Basic Audio
Good picture
TV
AV Cable
DVD
1
Audio Output Jacks Video Output Jack S-Video Jack
• Method 1 DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
• Method 2
(If S-Video is selected in the VIDEO OUT SELECT.)
• Method 3 DVD Player + TV with Component Video Jacks
(If Y, Pb or Pr is selected in the VIDEO OUT SELECT.)
NOTE
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
Method 2
Method 3
Best picture
Better picture
S-Video
Video Cables
Cable
OR OR
Component Video
Jacks
13