Table of Contents
Advertisement
DVD-S1000/00102B-2 8/9/02 10:48 AM Page 38
Troubleshooting
Before requesting service (troubleshooting), please check the following.
e
Problem
• Check the batteries in the remote. May need replacing.
No operations can be
• Operate the remote control at a distance of no more than 20 feet.
performed with remote.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
• Ensure that the disc is installed with the label side facing up.
Disc does not play.
• Check the region number of the DVD.
• 5.1 channel sound is reproduced only when the following conditions
5.1 channel sound is not
are met. :
being reproduced.
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the "Dolby 5.1 ch" mark on
the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
• The features or action cannot be completed at this time because:
The
icon appears on
screen.
1. The DVD's software restricts it.
2. The DVD's software doesn't support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is
Disc Menu doesn't appear.
• Check if the disc has a Menu.
Play mode differs from the
• Some of the functions selected in the Setup Menu may not work
Setup Menu selection.
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot be
• The Screen Ratio is fixed on your DVDs.
changed.
• Make sure you have selected the correct Digital Output in the Audio
No audio.
Options Menu.
e.
Forgot password
• Press power on from a cold start with no disc in the unit. Press the STOP
and PLAY buttons simultaneously on the front panel for three seconds. The
Select Menu Language display will appear. Select the desired language
button. Press the SETUP button on the remote control to select the Parental
nd
Mode. The Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and the Create
Password display will appear. You can now set your rating level and
change your password to a new number.
If you experience other
• Go to the contents and find the section of the instruction book that
problems.
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
38
Action
out of range.
General
Page
P4
Operating Temperature Range
Operating Humidity Range
Disc
(DIGITAL VERSATILE DISC)
P 7
P 12, 36
P 15
Video
Output
P 32~33
P 32~37
Audio
P 37
Output
P 36
*Total Harmonic Distortion
P 35
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
Power Requirements
AC 110~240V, 50/60 Hz
Power Consumption
13 W
Weight
2.8 Kg
Dimensions
430mm
240mm
79mm
+5°C to +35°C
10 % to 75 %
DVD
Reading Speed : 3.49 m/sec
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
CD : 12Cm
Reading Speed : 1.2 to 1.4 m/sec.
(COMPACT DISC)
Maximum Play Time : 74 min.
CD : 8Cm
Reading Speed : 1.2 to 1.4 m/sec.
(COMPACT DISC)
Maximum Play Time : 20 min.
VCD : 12Cm
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
Composite Video
1 channel : 1.0 Vp-p (75 Ω load)
Component Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
S-VIDEO
Chrominance Signal : 0.286 Vp-p (75 Ω load)
2 channel
L(1/L), R(2/R)
*Frequency Response
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
*S/N Ratio
110 dB
*Dynamic Range
100 dB
0.004 %
*: Nominal specification
Specifications
.
39
Advertisement
Table of Contents
