Product Overview; Operation; Freewheeling Or Using The Self-Propel Drive - Toro Power Max Heavy Duty 928 OE Operator's Manual

Product Overview

G016495
Figure 22
1. Hand-grip (2)
2. Auger/impeller lever
3. Speed selector lever
4. Quick Stick® discharge
chute control
5. Traction lever
6. Fuel tank cap
7. Engine oil fill tube/dipstick 16. Headlight
8. Chute deflector
9. Discharge chute
1
2
3
4
Figure 23
1. Primer
2. Ignition switch
3. Choke
4. Fuel shutoff valve
10. Scraper
11. Auger
12. Skid (2)
13. Electric starter button
14. Electric starter plug-in
15. Snow cleanout tool
17. Wheel clutch lever (2)
ST OP
G016500
5. Throttle
6. Oil drain plug
7. Recoil starter
1. Snow cleanout tool (attached to the handle)

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
Freewheeling or Using the
Self-propel Drive
Model 38660 only.
You can operate the snowthrower with the self-propel feature
engaged or disengaged (freewheeling).
To freewheel, insert the axle pins through the axle holes, but
not through the wheel hubs (Figure 25).
g019015
To self-propel, insert the axle pins through the holes in the
wheel hubs and the inner axle holes (Figure 26).
5
6
7 g019014
14
Figure 24
Figure 25
Figure 26