Setting Up The Audio Options - Samsung DVD-P460H User Manual

Setting Up the Audio
Options
Audio Options allows you to setup the audio device
and sound status settings depending on the audio
system in use.
1. With the unit in Stop mode, press the MENU button.
2. Press the buttons to select Setup, then press the
/
or ENTER button.
3. Press the buttons to select Audio Setup, then press
/
the or ENTER button.
4. Press the buttons to select the desired item, then
/
press the or ENTER button.
❶ Dolby Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital via the digital output.
Select Bitstream when connecting to a Dolby Digital
Decoder.
❷ MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 8CH). Select Bitstream when using the
Digital Audio Output.
❸ DTS
Select On when connecting to a DTS Decoder.
- Off : Doesn't output digital signal.
- On : Outputs DTS Bitstream via digital output.
Note
• There is no analog audio output when you play a DTS
sound disc.
26
Language Setup
Audio Setup
Display Setup
Parental Setup :
Setup
Enter Return Menu
AUDIO SETUP
Dolby Digital Out :PCM
MPEG-2 Digital Out :PCM
DTS :Off
Dynamic Compression :On
PCM Down Sampling :On
Speaker Setup
Setup
Enter Return Menu
❹ Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
❺ PCM Down Sampling
- On : Select this when the Amplifier connected to the
player is not 96KHz compatible. In this case, the
96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the
player is 96KHz compatible. In this case, all signals will
be output without any changes.
Note
Even when PCM Down sampling is Off
• Some discs will only output down sampled
audio through the digital outputs.
• To make the Setup menu disappear, press the
MENU button.
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby
Laboratories.
"DTS" and "DTS Digital Out" are trade-
marks of Digital Theater Systems, Inc.
Surround Sound Speaker Setup
1. With the unit in Stop mode, press the MENU button.
2. Press the buttons to select Setup, then press the
/
or ENTER button.
3. Press the buttons to select Audio Setup, then press
/
the or ENTER button.
4. Press the / buttons to select Speaker Setup, then
press the or ENTER button.
5. Press the / / / buttons to select the desired item,
then press the ENTER button to set the speaker.
AUDIO SETUP
Dolby Digital Out :PCM
MPEG-2 Digital Out :PCM
DTS :Off
Dynamic Compression :On
PCM Down Sampling :On
Speaker Setup
Setup
Enter Return Menu
SPEAKER SETUP