Related Manuals for Samsung DVD-P490
Summary of Contents for Samsung DVD-P490
-
Page 1: Dvd Player
DVD-P490 DVD Player user manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register AK68-01768A(01) -
Page 2: Precautions
precautions 1. Setting up - When condensation forms inside the player due to sharp changes in temperature, the - Refer to the identification label located on player may not operate correctly. If this the rear of your player for its proper operat- occurs, leave the player at room tempera- ing voltage. ture until the inside of the player becomes dry and operational. - Install your player in a cabinet with ade- quate ventilation holes. (7~10cm) Do not block ventilation holes on any of the compo- 4. Disc nents for air circulation. - Do not push the disc tray in by hand. - Do not clean record-cleaning sprays, ben- zene, thinner, or other volatile solvents that - Do not stack components. may cause damage to the disc surface. - Be sure to turn all components off before - Do not touch the disc’s signal surface. Hold moving the player. by the edges or by one edge and the hole - Before connecting other components to this in the center. player, be sure to turn them off. - Wipe the dirt away gently; never wipe a - Be sure to remove the disc and turn off the cloth back and forth over the disc. -
Page 3: Table Of Contents
Before You Start Table of Content Accessories Precautions .......2 Before you start ......3 Setup General Features . -
Page 4: Setup
Digital Photo Viewer (JPEG) neering or disassembly is prohibited. You can view Digital Photos on your TV. PROGRESSIVE SCAN OUTPUTS Repeat (576p) You can repeat a song or movie simply by pressing the REPEAT button. “CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY MP3/WMA COMPATIBLE WITH THIS PRODUCT AND MAY This unit can play discs created from MP3/WMA CAUSE ARTIFACTS TO BE DISPLAYED IN THE files. PICTURE, IN CASE OF 576 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS MPEG4 RECOMMENDED THAT THE USER SWITCH THE This unit can play MPEG4 formats within an avi file. CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS CD Ripping REGARDING YOUR TV SET COMPATIBILITY This feature lets you to copy audio files from disc WITH THIS MODEL 576p DVD PLAYER, PLEASE to USB device into MP3 format (only audio CD CONTACT SAMSUNG'S CUSTOMER SERVICE (CD DA)). CENTER.” _ setup... -
Page 5: Disc Type And Characteristics
Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types Recording Disc Size Max. Playing Time Characteristics (Logos) Types - DVD contains excellent sound Single-sided 240 min. 12 Cm and video due to Dolby Digital Double -sided 480 min. Audio and MPEG-2 system. - Various screen and audio functions Video can be easily selected through the Single-sided 80 min. 8 Cm on screen menu. Double -sided 160 min. VIDEO-CD 12 Cm 74 min. Audio - Video with CD sound, VHS quality & MPEG-1 compression technology. Video 8 Cm 20 min. AUDIO-CD 12 Cm 74 min. -
Page 6: Description
setup Description Front Panel Controls DISPLAY STANDBY/ON ( ) Operation indicators are displayed here. When STANDBY/ON is pressed on, the player is turned OPEN/CLOSE/ STOP ( ) DISC TRAY Press to open and close the disc tray/Stops disc play. Place the disc here. PLAY/PAUSE ( USB Host Begin or pause disc play. -
Page 7: Rear Panel
Rear Panel 5.1CH ANALOG AUDIO OUT 4. COMPONENT VIDEO OUT JACKS JACKS - Connect to an amplifier with 5.1ch analog input - Use these jacks if you have a TV with jacks. Component Video in jacks. These jacks pro- vide P R , P B and Y video. - If Component(P-SCAN) Video Output is select- DIGITAL AUDIO OUT JACKS ed in Setup Menu, progressive scan mode will... -
Page 8: Tour Of The Remote Control
setup Tour of the Remote Control DVD POWER Button Turns the power on or off. REPEAT Button Allows you to repeat play a title, chapter, track, or disc. DISC MENU Button Brings up the Disc menu. BOOKMARK Button SEARCH Buttos ( Allow you to search forward/backward through a disc. STOP Button ( Press to stop a disc. SUBTITLE (π)Button MENU Button Brings up the DVD player’s menu. AUDIO (√) Button Use this button to access various audio functions on a disc. 10. ENTER/π / † , √ / ® Buttons This button functions as a toggle switch. -
Page 9: Connections
connections Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components you are connecting for more information on those particular components. Connection to a TV (For Video) Using video/audio cables, connect the VIDEO (yellow)/ AUDIO (red and white) OUT terminals of 5.1 CH (front L-R) on the rear of the DVD player to the VIDEO (yellow)/ AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV. YELLOW WHITE Audio Cable Video Cable WHITE YELLOW... -
Page 10: Connection To A Tv (Interlace)
connections Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the pic- ture element into black and white(Y), blue(P B ), red(P R ) signals to present clear and clean images. (Audio signals are delivered through the audio output.) Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV. Using the audio cables, connect the AUDIO (red and GREEN BLUE white) OUT terminals of 5.1 CH (Front L-R)on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV. WHITE Press the TV/VIDEO button on the TV's remote control to Audio Cable select Component or DVD. Component cable WHITE (not included) - Page 11 Connection to a TV (Progressive) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the pic- ture element into black and white(Y), blue(P B ), red(P R ) signals to present clear and clean images. (Audio signals are delivered through the audio output.) Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV. Using the audio cables, connect the AUDIO (red and GREEN BLUE white) OUT terminals of 5.1 CH (Front L-R)on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV. WHITE Press the input selector on your TV remote control until Audio Cable Component cable the Component signal from the DVD player appears on the WHITE (not included)
-
Page 12: Connection To An Audio System (2 Channel Amplifier)
connections Connection to an Audio System (2 Channel Amplifier) Using the audio cables, connect the AUDIO (red and white) OUT terminals of 5.1 CH (Front L-R)on the rear of the DVD player to the AUDIO (red and white) IN termi- nals of the Amplifier. Using the video signal cable(s), connect the VIDEO or COMPONENT OUT terminals on the rear of the DVD play- er to the VIDEO or COMPONENT IN terminal of your TV. WHITE Audio Cable Turn on the DVD player, TV, and Amplifier. WHITE 2-channel amplifier Press the input select button of the Amplifier to select exter- nal input in order to hear sound from the DVD player. Note - Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears. - Page 13 Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. Using the video signal cable(s), connect the VIDEO or COMPONENT OUT terminals on the rear of the DVD player to the VIDEO or COMPONENT IN terminal of TV. Coaxial Cable (not included) Turn on the DVD player, TV, and Amplifier. Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player. Note - Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.
- Page 14 connections Connection to a 5.1CH Analog Amplifier If using audio cables for 5.1 CH Analog Amplifier (not included) connect the 5.1CH ANALOG AUDIO OUT termi- nals on the rear of the DVD player to the 5.1CH ANALOG AUDIO IN terminals of the 5.1CH Analog Amplifier. Using the video signal cable(s), connect the VIDEO or COMPONENT terminals on the rear of the DVD player to the VIDEO or COMPONENT terminals of your TV as described on pages 9 to 11. WHITE BLACK WHITE BLACK Turn on the DVD player, TV, and Amplifier. 5.1ch Analog Amplifier Press the input select button of the Amplifier to select exter- nal input in order to hear sound from the DVD player. Note - Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.
-
Page 15: Basic Functions
basic functions Playing a Disc 4. Stopping Play Press the STOP ( ) button during play. Before Play 5. Removing Disc - Turn on your TV and set it to the correct Video Press the OPEN/CLOSE ( ) button. Input by pressing TV/VIDEO button on the TV 6. Pausing Play remote control. Press the PLAY/PAUSE ( ) button on the remote control - If you connected an external Audio System, turn during play. on your Audio System and set it to the correct - Screen stops, no sound. Audio Input. To resume, press the PLAY/PAUSE ( )-button once again. 7. Step Motion Play (Except CD) After plugging in the player, the first time you press the Press the SKIP ( ) button on the remote control... -
Page 16: Using The Search And Skip Functions
basic functions Using the Display Function Using the Search and Skip Functions When Playing a DVD/VCD/MPEG4 During play, you can search quickly through a chapter or 1. During play, press the INFO button on the remote control. track, and use the skip function to jump to the next selection. 2. Press the π/† buttons to select the desired item. Searching through a Chapter or - When playing VCD, the Disc menu may not work. Track 3. Press the √/® buttons to make the desired setup and then During play, press the SEARCH ( ) button on the press the ENTER button. You may use the number but remote control for more than 1 second. tons of the remote control to directly access a title, chap ter or to start the playback from a desired time. 4. To make the screen disappear, press the CANCEL button. 2X, 4X, 64X, 128X Note 4X, 8X 2X, 4X, 8X To access the desired title when there is more than one in the disc. For example, if... -
Page 17: Using The Disc And Title Menu
Using the Disc and Title Menu Chapter Using the Disc Menu 1. During the playback of a DVD disc, press the-MENU button on the remote control. Title 2. Press the π/† buttons to select Disc Menu, then-press the ® or ENTER button. Repeat : Off Press ENTER key for Disc Menu Using the A-B Repeat function 1. Press the REPEAT A-B button at the point where you want repeat play to start (A). Note 2. Press the REPEAT A-B button at the point where you - Depending on a disc, the Disc Menu may not work. want the repeat play to stop (B). -
Page 18: Advanced Functions
advance functions Adjusting the Aspect Ratio If you are using a 4:3 TV (EZ View) For 16:9 aspect ratio discs - 4:3 Letter Box To play back using aspect ratio Displays the content of the DVD title in 16:9 aspect ratio. The (DVD) black bars will appear at the top and bottom of the screen. During play, press the INFO button on the remote 4:3 Pan Scan control. The left and right portions of the screen are cut off and the Press the ▲ / ▼ buttons to select Shortcut. central portion of the 16:9 screen is displayed. -
Page 19: Selecting The Subtitle Language
Changing the Camera MPEG4 Press Audio button at remocon repeatedly to Angle select the desired Audio PCM 1/2 AUDIO on MPEG4 then press the ENTER . When a DVD contains multiple angles of a particular scene, you can use the ANGLE function. 2. To remove the AUDIO icon, press the CANCEL or RETURN Using the ANGLE button (DVD) button. If the disc contains multiple angles, the ANGLE Note appears on the screen. - This function depends on audio languages are encoded on the disc and may not work. 1. During play, press the INFO button on the remote control. 2. Press the π/† buttons to select Shortcut. - A DVD disc can contain up to 8 audio languages. 3. Press the √/® buttons to select Angle, then -press the - To have the same audio language come up ENTER button. whenever you play a DVD; - Refer to “Using the Audio Language” on page 27. Selecting the Subtitle 4. Press the √/® buttons on the remote control to select the Language... -
Page 20: Using The Zoom Function
advance functions Using the Zoom Function 3. Press the √/® buttons to select Bookmark (except VCD), Using the Zoom Function (DVD/ then press the ENTER button. VCD) 4. When you reach the scene you want to mark, press-the 1. During play, press the INFO button on the remote control. ENTER button. Up to three scenes may be marked at a time. 2. Press the π/† buttons to select Shortcut. 3. Press the √/® buttons to select Zoom, then press the ENTER button. - During DVD play, press ENTER to zoom in 2X/4X/2X/ Normal in order. Note - During VCD play, press ENTER to zoom in - Only Menu Off is available for VCD2.0. Each 2X/4X/2X/Normal-in order. press of the DISC MENU button toggles between Menu-On and Menu Off. -
Page 21: Folder Selection
MP3/WMA/CD Audio : Name of currently playing file. Playback : Current Playback Time. 1. Open the disc tray. Place the disc on the tray. Close the tray. - Only one kind of file is played back when a disc or a : Current Playback Mode : There are four folder contains both MP3 and WMA files. modes. They can be selected in order by 2. Press the π/† or √/® buttons to select a song file. pressing the REPEAT button. - Press ENTER to begin playback of the song file. - Off: Normal Playback Play - Track: Repeats the current track. B e c a u s e Y o u 0 0 : 0 0 : 2 3 . . . - Folder: Repeats the current folder B e c a u s e Y o u C a c t u s - Random: Files in the disc will be played in S a d D a y u... -
Page 22: Mpeg4 Playback
advance functions MPEG4 Function Description - Do not try recording copyright protected MP3 files. Certain "secured" files are encrypted and code protected Function Description Reference page to prevent illegal copying. These files are of the following types: Windows Media TM (registered trade mark of Microsoft During play, press Inc) and SDMI TM (registered trade mark of The SDMI Skip the or ( or ) Foundation). You cannot copy such files. button, it moves forward or - Important: backward 5 minutes. The above recommendations cannot be taken as a During play, press the guarantee that the DVD player will play MP3 recordings, SEARCH ( or ) but- or as an assurance of sound quality. You should note that ton and press again to search certain technologies and methods for MP3 file recording on Search at a faster speed. Allows you... -
Page 23: Fast Playback
Note Skip Forward/Back • S ome MPEG-4 files created on a personal computer ) button. During playback, press the may not be play back. That is why Codec Type, • W hen there is more than one file, when you press the Version and Higher resolution over specification is button, the next file is selected. not supported. • W hen there is more than one file, when you press the • T his unit supports CD-R/RW written in MPEG4 in button, the previous file is selected accordance with the “ISO9660 format”. Fast playback Playing Media Files Using the USB Host feature To play back the disc at a faster speed, press uring playback. • E ach time you press either button, the playback speed will You can enjoy the media files such as pictures, movies change as follows:... -
Page 24: Cd Ripping
advance functions 3. Press the π/† buttons to select START,-then-press the • CBI (Control/Bulk/Interrupt) is not supported. ENTER button. • D igital Cameras that use PTP protocol or require additional File copy begins. program installation when connected to a PC are not - To cancel the copying in progress, press the CANCEL but ton. supported. Play • A device using NTFS file system is not supported. Track 01 0 0 : 0 3 : 1 5 (Only FAT 16/32 (File Allocation Table 16/32) file system is Track 01 Track 02 supported.) DEV : USB 1 Track 03 UNSELECT Track 04... - Page 25 Slide Show • : The unit enters slide show mode. • Before beginning the Slide Show, the picture interval must be set. • : When this icon is selected and ENTER is pressed, the pictures change automatically with about a 6 second interval. • : The pictures change automatically with about a 12 second interval. • : The pictures change automatically with about a 18 second interval. CD-R JPEG Disc - Only files with the “.jpg” and “.JPG” extensions can be played. - If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played. - Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played. - The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters (. / = +). - Only a consecutively written multi-se ssion disc can be played.If there is a blank segment in the multi-session disc, the disc can be played only up to the blank segment. - A maximum of 3000 images can be stored on a single CD. - Kodak Picture CDs are recommended. - When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played. - Kodak Picture CD: The JPEG files in the pictures folder can be played automatically. - Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu. - Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
-
Page 26: Changing Setup Menu
changing setup menu Using the Setup Menu Setting Up the Language Features The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set If you set the player menu, disc menu, audio and subtitle up a parental level, even adjust the player to the type of language in advance, they will come up automatically every television screen you have. time you watch a movie. 1. With the unit in Stop mode, press the MENU button on the Using the Player Menu Language remote control.Use the π/† buttons to select Setup, then press the ® or ENTER button. 1. With the unit in Stop mode, press the MENU button. 2. Press the π/† buttons to select Setup, then press the ® or ENTER button. Language Setup ® 3. Press the π/† buttons to select Language Setup, then Audio Setup ® press the ® or ENTER button. Display Setup ®... -
Page 27: Using The Audio Language
Using the DivX Subtitle Language Using the Audio Language 1. With the unit in Stop mode, press the MENU button. 1. With the unit in Stop mode, press the MENU button. 2. Press the π/† buttons to select Setup, then press the ® 2. Press the π/† buttons to select Setup, then press the ® or ENTER button. or ENTER button. 3. Press the π/† buttons to select Language Setup, then 3. Press the π/† buttons to select Language Setup,-then press the ® or ENTER button. press the ® or ENTER button. 4. Press the π/† buttons to select Audio, then press the ® or ENTER button. 4. Press the π/† buttons to select DivX Subtitle, then press 5. Press the π/† buttons to select the desired language, then the ® or ENTER button. press the ® or ENTER button. 5. Press the π/† buttons to select the desired -language, Select “Original” if you want the default soundtrack then press the ® or ENTER button.The language is language to be the original language the disc is recorded in.If the selected language is not recorded on the disc,the selected and the screen returns to Language Setup original pre-recorded language is selected.The language menu.To make the setup menu disappear, press the is selected and the screen returns to Language Setup MENU-button. menu.To make the setup menu disappear, press the LANGUAGE SETUP MENU button. -
Page 28: Surround Sound Speaker Setup
changing setup menu Dolby Digital Out ❶ - PCM : Converts to PCM(2CH) audio. Manufactured under license from Dolby - Bitstream : Outputs Dolby Digital or DTS via the digital Laboratories. “Dolby” and the double-D symbol output. Select Bitstream when connecting to a are trademarks of Dolby Laboratories. Dolby Digital or DTS Decoder. “DTS” and “DTS Digital Out” are trademarks of MPEG-2 Digital Out ❷ Digital Theater Systems, Inc. - PCM : Converts to PCM(2CH) audio. - Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH Surround Sound Speaker Setup or 8CH). Select Bitstream when using the Digital Audio 1. With the unit in Stop mode, press the MENU Output. button. Dynamic Compression ❸ 2. Press the π/† buttons to select Setup, then - On : To select dynamic compression. press the or ENTER button. ® - Off : To select the standard range. 3. Press the π/† buttons to select Audio Setup, PCM Down Sampling then press the or ENTER button. ❹ ® - On : Select this when the Amplifier connected to the 4. Press the π/† buttons to select Speaker Setup, then press the... -
Page 29: Setting Up The Display Options
The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small). Language Setup ® Select the size of the speakers to be connected. Audio Setup ® Display Setup ® Front (FL, FR) Parental Setup : ❶ ® - Large: Normally select this. DivX(R) Registration ® - Small: W hen the sound distorts or the suround sound effects are difficult to hear, select this. This activates the Dolby Digital bass redirec ❶ TV Aspect tion circuitry and outputs the bass frequencies of Depending on a type of television you have, you the speaker from the subwoofer. may want to adjust the screen setting (aspect ratio). Center ❷ - 4:3 Letter Box : Select when you want to see - None: If you do not connect a center speaker, the total 16:9 ratio screen DVD select this. supplies, even though you have a TV with a 4:3 - Large: Normally select this. -
Page 30: Setting Up The Parental Control
changing setup menu Setting Up the Parental ❺ Video Output Select Video Output. Control - I-SCAN : Select when you want to use Component Interlace Out. The Parental Control function works in conjunction with DVDs that have been assigned a rating, which - P-SCAN : Select when you want to helps you control the types of DVDs that your family use Component Progressive Out. watches. There are up to 8 rating levels on a disc. • If you press the VIDEO SEL. button, Video output mode is changed in regular Setting Up the Rating Level sequence in no disc mode. (I-SCAN ➞ P-SCAN) • If the Yes/No selection in the Display Setup sub 1. With the unit in Stop mode, press the MENU button. Menu is not made within 10 seconds, the screen 2. Press the π/† buttons to select Setup, then press the ® returns to the previous menu. or ENTER button. Language Setup ® DISPLAY SETUP Audio Setup ®... -
Page 31: Changing The Password
6. Press the π/† buttons to select the Rating Level you want, 5. Press the π/† button to fill the blank box, then press the then press the ® or ENTER button. ENTER button to insert the number. Enter your new pass e.g) Setting up in Kids Safe. word again. PARENTAL SETUP PARENTAL SETUP Rating Level √ Kids Safe Rating Level :Kids Safe Change Passwor Level 2 Level 3 Change Password Level 4 Level 5 Enter Password Level 6 Enter Return Menu To make the setup menu disappear, press the MENU PARENTAL SETUP Rating Level :Kids Safe... -
Page 32: Reference
Firmware upgrade Introduction 2. Press the √/® buttons to select Total, then press the Samsung will often support the software upgrade to ENTER button. improve the performance of this unit to the latest sta- tus, through Samsung Internet Site (www.samsung. 071208.VD.B.P480KXEG com). 0801023.VD.B.P480KXEG Because the specially new mpeg4 codec continues and it is appearing. What improvements are made depends on the upgrade software you are using as well as the software that your DVD-player contained before the Firmware upgrade starts upgrade. How to make an upgrade disc - In the middle of the writing, the tray will open Write the downloaded file onto a blank CD-R or CD- automatically. After taking out the disc, please wait for RW disc, using the following settings: about 2 minutes. - If the unit was succesfully updated, the unit will turn off and on after closing the tray automatically. When the 1. You have to download a new file through Download Center unit turns on, this screen will display. of Samsung Internet Site (www.samsung.com). 2. Write the file to Disc using CD-RW of your computer. 3. Press the π/† buttons to select the desired language, and then press the ENTER button. -
Page 33: Troubleshooting
Troubleshooting Before requesting service (troubleshooting), please check the following. Problem Action Page • Check the batteries in the remote control. They may need replacing. No operations can be • O perate the remote control at a distance of no more than 20 feet. performed with the • R emove batteries and hold down one or more buttons for several minutes remote control. to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again. • Ensure that the disc is installed with the label side facing up. Disc does not play. • Check the region number of the DVD. • 5 .1 channel sound is reproduced only when the following conditions P12~14 are met. : 1) The DVD player is connected with the proper Amplifier 5.1 channel sound is 2 ) The disc is recorded with 5.1 channel sound. not being reproduced. P27~29 • C heck whether the disc being played has the “5.1 ch” mark on the outside. • C heck if your audio system is connected and working properly. • I n a SETUP Menu, is the Audio Output set to Bitstream? • T he features or action cannot be completed at this time because: 1. The DVD’s software restricts it. -
Page 34: Specifications
Y : 1.0 Vp-p (75 Ω load) Output Component Video Pr : 0.70 Vp-p (75 Ω load) Pb : 0.70 Vp-p (75 Ω load) 5.1 Channel F/L,F/R,R/L,R/R,CT,S/W *Maximum Output level 2 Vrms Audio Output Digital Audio Output Coaxial (S/PDIF) *Frequency Response 20Hz ~ 202kHz *: Nominal specification - Samsung Electronics Co., Ltd reserves the right to change the specifications with out notice. - Weight and dimensions are approximate. _ reference... - Page 35 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region Country Contact Center Web Site CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca North America MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com/mx U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us ARGENTINE 0800-333-3733 www.samsung.com/ar...
- Page 36 ELECTRONICS AK68-01768A(01)