Setting Up The Display Options - Samsung DVD-P460D User Manual

Surround Sound Speaker Setup
1. With the unit in Stop mode, press the MENU button.
2. Press the œ œ /ƒ ƒ buttons to select Setup, then press the ‹
or ENTER button.
3. Press the œ œ /ƒ ƒ buttons to select Audio Setup, then press
the ‹ or ENTER button.
4. Press the œ œ /ƒ ƒ buttons to select Speaker Setup, then
press the ‹ or ENTER button.
5. Press the œ œ /ƒ/¦/‹ buttons to select the desired item,
then press the ENTER button to set the speaker.
Note :
To make the setup menu disappear, press the MENU button.
The default settings : FRONT L, R (Small),
CENTER (Small), SURROUND (Small).
Select the size of the speakers to be connected.
❶ Front (FL, FR)
- Large: Normally select this.
- Small: When the sound distorts or the suround
sound effects are difficult to hear, select this.
This activates the Dolby Digital bass redirec
tion circuitry and outputs the bass frequencies
of the speaker from the subwoofer.
❷ Center
- None: If you do not connect a center speaker,
select this.
- Large: Normally select this.
- Small: When the sound distorts, select this.
This activates the Dolby Digital bass redirec-
tion circuitry and outputs the bass frequencies
of the center speaker from other speakers.
❸ Surround (SL, SR)
- None: If you do not connect a center speaker,
select this.
- Large (Rear/Side): Normally select either of
these according to the rear speaker's position.
- Small (Rear/Side): When the sound ditorts or
the surround sound effects are dificult to hear,
select either of these according to the rear
speaker's position.
28
AUDIO SETUP
Dolby Digital Out :PCM
MPEG-2 Digital Out :PCM
DTS :Off
Dynamic Compression :On
PCM Down Sampling :On
‹ ‹
Speaker Setup
Setup
Enter Return Menu
SPEAKER SETUP
This activates the Dolby Digital bass rediretion
circuitry and outputs the bass frequencies of
the rear speaker from other speakers.
Setting up Test
The test output signals come clockwise starting
from the Front Speaker(L).
Adjust Channel Balance so that speakers output
equally in your room.
FRONT(L) ➝ CENTER ➝ SUBWOOFER ➝
FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L)
Note
To make the Setup menu disappear or return to
menu screen during set up, press RETURN or ¦
button.
• The subwoofer test output signal is lower
than the other speakers.
• The MPEG Multichannel logo is a trademark
registered by PHILIPS Corporation.
• If you set Front (L, R) "Small", LFE
(Subwoofer) is set "On" automatically.
Setting Up the Display
Options
Display options enable you to set various video functions of
the player.
1. With the unit in Stop mode, press the MENU button.
2. Press the œ œ /ƒ ƒ buttons to select Setup, then press the ‹
or ENTER button.
3. Press the œ œ /ƒ ƒ buttons to select Display Setup, then press
the ‹ or ENTER button.
4. Press the œ œ /ƒ ƒ buttons to select the desired item, then
press the ‹ or ENTER button.
❶
TV Aspect
Depending on a type of television you have, you may
want to adjust the screen setting (aspect ratio).
- 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
- 4:3 Pan&Scan : Select this for conventional size TVs
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
- 16:9 Wide : You can view the full 16:9 picture on your
wide screen TV.
‹ ‹
Language Setup
‹ ‹
Audio Setup
‹ ‹
Display Setup
‹ ‹
Parental Setup :
‹ ‹
DivX(R) Registration
Setup
Enter Return Menu