Table of Contents
Advertisement
Connection to a 5.1CH Analog Amplifier
1
If using audio cables for 5.1 CH Analog Amplifier (not
included) connect the 5.1CH ANALOG AUDIO OUT termi-
nals on the rear of the DVD player to the 5.1CH ANALOG
AUDIO IN terminals of the 5.1CH Analog Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-
VIDEO or COMPONENT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO or COMPONENT terminals
of your TV as described on pages 9 to 12.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select exter-
nal input in order to hear sound from the DVD player.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 26 to 27)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
GREEN
WHITE
BLACK
BLACK
GREEN
WHITE
5.1ch Analog
Amplifier
15
Advertisement
Table of Contents
