Reference; Firmware Upgrade - Samsung DVD-P172 User Manual

REFERENCE

REFERENCE

Firmware upgrade

Introduction
The following events may interrupt the update
procedure and may result in permanent
damage to DVD Player
• Unplugging the power cord.
• Power outage.
• Dirt or Scratch in the discs.
• Open a tray door during processing
Playback can only support English Subtitle.
If you have any question or any problem,
please feel free to contact your nearest
SAMSUNG Service Center and agency.
How to make an upgrade disc
Write the downloaded file onto a blank CD-R or CD-
RW disc, using the following settings:
Download the software update file from the
1.
Samsung Internet Site (http://www.samsung.com).
checking your DVD-PLAYER Model name on the
rear, download a file using the Search Your
Model/Name window.
Write the file to disc using CD-R driver of your
2.
computer.Software update file name: NP7EA.
rom Please do not change the file name.If you
change the file name, DVD-PLAYER do not recognize
the update CD-R.
Note
•Recommended Application Program
- Nero Burning / Easy CD Creator.. etc
•Option
- Multisession; No Multisession
- CD close or Finalized CD
Update procedure
1.Insert the update CD-R disc with the software
update. It takes about 10 seconds to load the
update disc.
30
2.READING appears at the left upper side of
the screen.
3. ERASE and WRITE appears in turn at the
same location for about 30 sec during
firmware update.
4.It will be displayed DONE if the update is
completed successfully.
5. Eject the update disc by using the
OPEN/CLOSE button once the unit turns on.
6.Firmware update is ended. Turn on your player.
• In order to check new version like the
upper, press the INFO button after
opening a tray.
Note
The display can be changed depend on its version and
without any notice.
READING
ERASE
RETR 00
DONE
RETR 00
Code Ver : xxxxxx
Servo Ver : xxxxxx