Page 1
CHILDRENS ELECTRONIC BATTERY-OPERATED MOTOR TRICYCLE OPERATIONAL INSTRUCTIONS Model no: 90313 Batch no: PR4411 Read this manual in detail before use and retain this instruction manual for future reference.
Page 2
The illustrations used in the manual are to illustrate the operation method and structure of the product. Where there is a small difference between the physical item and the illustrations, please take the physical as the standard. SPECIFICATIONS OF THE MOTOR TRICYCLE: Age range: 3 –...
Page 3
1. SAFETY: PREVENT INJURIES AND DEATHS: NEVER LEAVE CHILD UNATTENDED. DIRECT ADULT SUPERVISION IS REQUIRED. Please instruct the child on the correct way to drive the motor tricycle. Make sure your child knows how to steer, how to start and stop the vehicle and knows the rules for safe driving.
2. CONNECTING THE BATTERY: The battery is located under the seat. To access, remove the screw using a screwdriver (not included) holding the heat down and then take the seat off the body. If the battery is not connected and you charge the motor tricycle, the battery will not be charging.
Page 5
The forward/reverse switch must not be on either mode when charging. Charging time is 8 – 12 hours. The first hour of charging can get back 60% of the battery’s energy back. You may leave it to charge overnight, but NEVER continuously over 20 Hours. Otherwise, you will shorten the batteries life.
3. CHARGING THE BATTERY: Insert the plug of the charger into the charging socket which is on the main body of the bike below the siren and music buttons. Connect the charger to the motor tricycle first, and then connect the plug to power.
4. OPERATION: Step on the pedal to start, lift foot off the pedal to stop. Press go ahead to go forward, press back to reverse. When the forward/backward switch is not on either mode, the bike will not drive. When in go forward, the head light will be on. When in backward, the taillight will be on.
Page 8
5. ASSEMBLY: Warning: Children could be injured by sharp edges, sharp angles, small components or electrical components. Take care when assembling or disassembling the motor tricycle. Keep the components and battery out of reach of children. Screw and washer pack: Total fittings: 2 x nuts to attach the front wheel 4 x washers to attach the front wheel...
Page 9
Assembling the front wheel: 1. The method from one side to the other when completed will be: Nut, washer, pass through the hole of the fork, washer, wheel cap, wheel, wheel cap, washer, pass through the hole of the fork, washer, nut.
Page 10
Add the front wheel cover by clipping it onto the fork above the front wheel. Fix the windshield onto the head cover with three self-tapping screws. Fix the head cover onto the bracket on the handlebar using 3 self-tapping screws. Ensure the headlight lead is passed through the back of the handlebars for connection later on.
Page 11
Attach the plastic gauge piece to the front bars as below. Add the toolbox to the main body of the bike. Insert the wires of the siren light through the holes of the toolbox. Fix the alarm light using 2 self tapping screws. Connect the two parts of the two the toolbox (as shown in the above diagram).
Page 12
Connect the wires of the siren light to the to those of the main body of the bike. Fix the toolbox to the body of the bike using 2 “3x12” washers and 2 self-tapping screws. Join the main body of the motor tricycle to the front end with the front wheel using the bolt and washer and nut included.
Page 13
Use the nut to screw onto the bolt to hold the pieces tightly together. Use the included plastic spanner to screw the bolt clockwise. Headlight connection: Once the main body and the front end of the motor tricycle are joined, you can then connect the wires from the main body to the wires on the front end.
Page 14
6. MAINTENCE AND TROUBLE SHOOTING: Factors which may influence the motor tricycles performance and life span: - How flat the driving surface is - The weight of the driver - Whether the battery has been fully charged - Whether the motor tricycle is regularly used - Whether water or any other liquid has eroded the electrical components Cleaning:...
Page 15
Please take care with the battery as it contains acid electrolyte. Handling of the battery by adults only. If the battery has leaked, do not touch the acid. Place the battery into a polybag and dispose of it. If the electrolyte splashes on your skin or into your eyes, immediately wash with water for at least 15 minutes and consult your doctor.
Need help?
Do you have a question about the PR4411 and is the answer not in the manual?
Questions and answers