Subscribe to Our Youtube Channel
Related Manuals for Lenoxx 6106
Summary of Contents for Lenoxx 6106
- Page 1 RIDE-ON FRONT LOADER Model: 6106 Batch: PR3762 PLEASE READ AND RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Battery Cautions
SAFETY INFORATION AND WARNINGS: 1. Children using this product must be under the supervision of an adult at all times. 2. The ride-on is not to be used by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. 3. - Page 3 If the battery has leaked, do not touch the acid. Place the battery into a polybag and dispose of it. If the electrolyte splashes on your skin or into your eyes, immediately wash with water for at least 15 minutes and consult your doctor. Do not contact the batteries two terminals with any other metal objects.
- Page 4 ASSEMBLY: CONNECTING THE WHEELS: 1. Add the 3 x normal wheels to the axel. Secure the wheels to the axel by fitting the split pins to the holes on the axel. The order of adding parts to the axel is: washer, wheel, washer, split pin, wheel cover.
-
Page 5: Installing The Seat
2. Add the driving wheel to the car. The driving wheel has a cog on it which matches up to the gear box. The order of adding parts to the axel on the side of the car with the gear box is: wheel, washer, split pin, wheel cap. - Page 6 INSTALLING THE DIGGER OPERATING ARM: Connect the lead from the operating arm to the lead from the front body of the ride-on. Add the operating arm into the installation position, so that the white stud corresponds with the correct position. The lead can be pushed/poked gently through the threading hole next to the stud.
-
Page 7: Connecting Power
CONNECTING POWER: Open the console below the steering wheel by unscrewing the 4 x screws. Remove the protective cap on the red battery terminal. Connect the red lead onto the red battery terminal. Add the console so it is closed and screw the screws into position to fix it into place. -
Page 8: Operation
CONTROLS ON THE RIDE-ON: OPERATION: After assembly and charging: Ensure the charger is removed from the charging socket on the ride-on. Press the power switch to turn the ride-on on. Put the ride-on into forward or backward mode by pushing the forward/stop/backward switch to either forward or backwards. - Page 9 A long period of non-use will damage the battery. It is advised that the battery should be charged once a month, even if the ride-on is not being used. A new battery must be fully charged before its first use.
Need help?
Do you have a question about the 6106 and is the answer not in the manual?
Questions and answers