The illustrations used in this manual are to illustrate the operation method and product structure of the product. Where there is a small difference between the physical item and the illustrations, please take the physical as the standard. SAFETY INFORMATION AND WARNINGS: 1.
BATTERY CAUTIONS: The battery must be charged only by adult .Please charge the product before use. If the ride-on will not be used for a long period of time (3 months or longer), it is advised that you fully charge the battery and disconnect it from the connections. A long period of non-use will damage the battery.
Page 4
The POWER SWITCH must be in the OFF position when charging. Find the charging input socket below the seat. Plug the charger port into the input socket. Plug the charger plug into a wall outlet. The battery will begin charging. Charger must be removed from the ride-on’s charging socket before it is used.
PARTS LIST: Item Name Picture Qty. Note Car body Windshield Seat Screw is on the seat Gearbox Wheel Each wheel is the same Spoiler Steering wheel Mirror Left and right M10 washer Placed on the front and rear axel M8 nut Placed on the front and rear axel M5x35 bolt and M5 nut Used with the steering wheel...
PARTS DIAGRAM: Assembly info: The ride‐on requires assembly by an adult. Children can be harmed by small parts, sharp edges and sharp points on The ride‐on’s unassembled state. Care should be taken in unpacking and assembly of the ride‐on. Children should not handle parts or help in assembly of the ride‐on. Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
INSTALLING THE REAR FREE WHEELS: Optional. An added set of wheels for increased stability. Turn the car upside down. Remove the M4X12mm screw that has been fixed to the car body. Install the rear free wheels. Then fix with the M4X12mm screws.
INSTALLING THE SPOILER AND SEAT: Remove the M4X12mm screws that has been fixed to the car body. Fit the spoiler into position. Use the M4X12mm screws to secure the spoiler in place. The rear of the seat hooks into the body of the car.
Page 9
INSTALLING THE REAR VIEW MIRRORS: Insert the hook on the mirror into the holes on both Sides of the body. Repeat for the other mirror. OPERATION INSTRUCTIONS:...
Page 10
After assembly and charging: Ensure the charger is removed from the charging socket on the ride‐on. 1. Put the power switch into the on position. 2. Press the forward/reverse switch to the forward position, then press the pedal, the ride‐on will drive forwards. 3.
7. Mode button: Press to alternate playback from USB port, TF card or AUX in device (if multiple are connected). 8. Voltage display: the value on the display can be used to determine whether the battery needs to be recharged. BUTTONS ON THE STEERING WHEEL: Press the HORN button for horn sounds.
Page 12
MAINTENCE AND TROUBLE SHOOTING: Factors which may influence the ride‐on’s performance and life span: ‐ How flat the driving surface is ‐ The weight of the driver ‐ Whether the battery has been fully charged ‐ Whether the motor ride‐on is regularly used ‐...
Page 13
PROBLEM: The battery will not recharge. CAUSE: Battery connector or adapter connector is loose. Make sure the battery connector and adapter connector are firmly plugged together. CAUSE: Charger is not plugged in. Make sure the charger is plugged into the wall outlet and the power flow to the outlet is on. CAUSE: Charger is not working.
BATTERY DISPOSAL: • Your sealed lead‐acid battery mu be recycled or disposed of in an environmentally sound manner. • Do not dispose of your lead‐acid battery in a fire. The battery may explode or leak. • Do not dispose of a lead‐acid battery in your regular, household trash. The incineration, land filling or mixing of sealed lead‐acid batteries with household trash is prohibited by law.
Need help?
Do you have a question about the GTRBLACK and is the answer not in the manual?
Questions and answers