Related Manuals for Lenoxx 90313
Summary of Contents for Lenoxx 90313
- Page 1 CHILDRENS ELECTRONIC BATTERY OPERATED MOTOR TRICYCLE OPERATIONAL INSTRUCTIONS Please read this manual in detail before use. Model no: 90313 ...
- Page 2 WARNING: Adult supervision is required. Do not drive anywhere dangerous including slopes with more than 10 degrees, streets, next to bodies of water and away from other obstacles. The driver must sit on the seat to drive. Read the instruction manual and acknowledge it before use. 1. Adult supervision required 2. Read the instruction manual and instruct the child user 3. The weight limit is 25kg 4. Only one rider to use at the one time 5. Please wear a bike helmet when riding 6. Sit straight on the seat when riding 7. Ride only on flat surfaces 8. Ride away from other vehicles and bodies of water 9. Recharge the batteries out of reach of children 10. Do not charge the battery for more than 12 hours 11. Wear shoes when riding 12. Only use a power adaptor and battery by the manufacturers advice ...
- Page 3 1. SPECIFICATIONS OF THE MOTOR CYCLE: Age range: 3 – 7 Max speed: 3km/h Measurements: 80cm x 36cm x 52cm Battery: Sealed and dry, 6V 4AH Charging time: 8 hours Loading capacity: 25kg 2. HOW TO OPERATE THE BATTERY OPERATED MOTOR CYCLE: 1. Step on the pedal to start, lift foot off the pedal to stop. 2. Press go ahead to go forward, press back to reverse. When the switch is not on either mode, the bike will not drive. 3. When in go forward, the head light will be on. 4. When in reverse, the tail light will be on. 5. Press the siren button to hear the siren, press the music button to hear the music. 3. SAFETY: Please instruct the child on the correct way to drive the motor tricycle. Please keep in mind the condition of the area they are riding in and the child’s driving ability. Designed for use by children between the ages of 3 – 7 years, weighing less the 25kg. This is advisable to avoid damage to the motor, gears and to prohibit overloading. Do not let children ride in the street, anywhere dangerous including slopes with more than 10 degrees, streets, next to bodies of water and away from other obstacles. Use during day light hours or in an illuminated area is advised to avoid accidents in the dark. When the motor tricycle is running, do not place anything on the moving parts such as the motor, gear box, wheels or steering wheel. Do not drive on long or wet grass, mud, soft ground, gravel or sand. Do not drive neat anything flammable or explosive. Keep any hazardous chemicals out of the drivers reach. ...
- Page 4 4. HOW TO USE THE BATTERY: It is normal for the battery to be warm when charging. 1. The motor tricycle must be charged prior to its first use. Working AC voltage is 220V (or 1100V)(+/‐10%). 2. Charging time is 8 ‐ 12 hours. The first hour of charging can get back 60% of the batteries energy back. You may leave it to charge overnight, but NEVER continuously over 20 Hours. Otherwise you will shorten the batteries life. 5. MAINTENCE AND TROUBLE SHOOTING: Factors which may influence the motor tricycles performance and life span: ‐ How flat the driving surface is ‐ The weight of the driver ‐ Whether the battery has been fully charged ‐ Whether the motor tricycle is regularly used ‐ Wether water or any other liquid has eroded the electrical components Cleaning: Clean the motor tricycle with a soft dry cloth. Do not use any wax or spray liquids for cleaning. It could erode the power switch. Storage: Do not store the motor tricycle in an area of high temperature, humidity or near flames. When raining or snowing, keep the motor tricycle under cover and out of the weather. Do not change the batteries setting, as it can cause fire and damage the electrical circuit system. Do not change the motor tricycles electrical circuit system. Any repairs done to this unit must be carried out by authorised and qualified service personnel. Do not allow children to charge the motor tricycle, play with the battery or motor. ...
- Page 5 If the motor tricycle will not be used for a long period of time (3 months or longer), it is advised that you fully charge the battery and disconnect it from the connections. A long period of non use will damage the battery. It is advised that the battery should be charged once a month, even if the motor tricycle is not being used. A new battery must be fully charged before its first use. Please take care with the battery as it contains acid electrolyte. Handling of the battery by adults only. If the battery has leaked, do not touch the acid. Place the battery into a polybag and dispose of it. If the electrolyte splashes on your skin or into your eyes, immediately wash with water for at least 15 minutes and consult your doctor. Do not contact the batteries two terminals with any other metal objects. It will cause short circuiting, damage or fire. Adjust the f/r switch to on and press the siren button to check for power. If you hear no music, check that the battery has been joined up correctly. Correct if required. Never push or pull the motor tricycle backward when it is running. Do not plug the charger into any non‐working or faulty wall socket. This could cause short circuiting or fire. In the circumstance of unstable voltage, we suggest that you equip a regulator. ...
- Page 6 6. ASSEMBLY: Warning: Children could be injured by sharp edges, sharp angles, small components or electrical components. Take care when assembling or disassembling the motor tricycle. Keep the components and battery out of reach of children. 1. The method from one side to the other when completed will be: Nut, washer, pass through the hole of the fork, plastic washer, spacer, wheel cap, wheel, wheel cap, spacer, plastic washer, pass through the hole of the fork, washer, nut. 2. Put on the wheel caps onto the front wheel on both sides. 3. Add the spacer after each wheel cap, followed by the plastic washer after each wheel cap. 4. Insert the front axel onto the holes of the fork. 5. Put a washer on each side of the wheel. 6. Fasten the nut on each side with a spanner. ...
- Page 7 Add the front wheel cover by clipping it onto the fork above the front wheel. Fix the windshield onto the head cover with three self tapping screws. ...
- Page 8 Fix the head cover onto the bracket on the handle bar using 3 self tapping screws. Ensure the headlight lead is passed through the back of the handlebars for connection later on. Attach the plastic gauge piece to the front bars as below ...
- Page 9 Add the toolbox to the main body of the bike. Insert the wires of the siren light through the holes of the tool box. Fix the alarm light using 2 self tapping screws. Fix the bracket under the tool box using 4 self tapping screws. Connect the two parts of the two the tool box (as shown in the above diagram). Connect the wires of the siren light to the to those of the main body of the bike. Add the tool box and the bracket to the holes on the main body of the work. Fasten with 2 self tapping screws. ...
- Page 10 Join the main body of the motor tricycle to the front end with the front wheel using the bolt and washer and nut included. ...
- Page 11 ...
- Page 12 Use the nut to screw onto the bolt to hold the pieces tightly together. Headlight connection: Once the main body and the front end of the motor tricycle are joined, you can then connect the wires from the main body to the wires on the front end. This is optional if you would like the motor tricycle to have a headlight come on when the pedal is pressed down and the motor tricycle is driving. ...
- Page 13 1. Step on the pedal to start, lift foot off the pedal to stop. 2. Press go ahead to go forward, press back to reverse. When the forward/reverse switch is not on either mode, the bike will not drive. 3. When in go forward, the head light will be on. 4. When in reverse, the tail light will be on. 5. Press the siren button to hear the siren, press the music button to hear the music. ...
- Page 14 The battery is located under the seat. To access, remove the screw holding the heat down and then take the seat off the body. The battery is held in place with a plastic cover. You can remove it to access the battery by unscrewing the 4 screws. Plug the red connector onto the red terminal of the battery. Plug the black connector onto the black terminal of the battery. If the battery is not connected and you charge the motor tricycle, the battery will not be charging. ...
- Page 15 Plug the red connector onto the red terminal of the battery. Plug the black connector onto the black terminal of the battery. If the battery is not connected and you charge the motor tricycle, the battery will not be charging. The forward/reverse switch must not be on either mode when charging. Charging time is 8 – 12 hours. The first hour of charging can get back 60% of the batteries energy back. You may leave it to charge overnight, but NEVER continuously over 20 Hours. Otherwise you will shorten the batteries life. It is normal for the battery to be warm when charging. The motor tricycle must be charged prior to its first use. Working AC voltage is 220V (or 1100V)(+/‐10%). ...
- Page 16 Insert the plug of the charger into the charging socket which is on the main body of the bike above the siren and music buttons. Connect the charger to the motor tricycle first, and then connect the plug to power. Please note, the motor tricycle cannot be driven when charging. Do not insert any metal pieces into the charging hole as to avoid short circuiting and any damage to the electro circuit. This vehicle has a function of charging protection and while it is being charged, other functions can not be used. This vehicle also has a function of overload protection. If the vehicle is overloaded or operated incorrectly, the overload preventer will cut off automatically. It will connect automatically in 20 minutes. ...
- Page 17 ...
Need help?
Do you have a question about the 90313 and is the answer not in the manual?
Questions and answers