Homewerks 16-U42WNCHB Assembly Instructions

HOMEWERKS
TWO HANDLE LAUNDRY
FAUCET
16-U42WNCHB - Polished chrome finish

PACKAGE AND HARDWARE CONTENTS

PART DESCRIPTION
A Faucet body
B Mounting nuts
C Hose thread aerator

SAFETY INFORMATION

Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING
• Protect your eyes with safety glasses when cutting or soldering water
supply lines.

PREPARATION

Before beginning assembly of product, make sure all parts are present.
Compare parts with package and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product. Contact
customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools required for assembly (not included): adjustable wrenches, groove
joint pliers, pipe wrench, Phillips screwdriver, supply lines, thread seal
tape, silicone.
Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-319-3757,
7:30 a.m. - 4:30 p.m., CST, Monday - Friday.
Homewerks Worldwide, LLC • Lake Bluff, IL 60044 • HomewerksWW.com
™
QUANTITY
1
2
1
CAUTION
• If you solder the joints during installation, the seats, cartridges, and
washers must be removed before using a flame or the warranty will
be voided on these parts.
• Cover the drain to avoid losing parts.
Installation may vary depending on how the previous faucet was in-
stalled.
Supplies necessary for the installation of the faucet are not all included;
however, they are available wherever plumbing supplies are sold.
Prior to beginning installation, turn off the hot and cold water lines, then
turn on the old faucet to release built-up pressure. When installing the
new faucet, hand tighten the connector nuts. DO NOT OVERTIGHTEN.
Connections that are too tight will reduce the integrity of the system.
A
C
B
NSF 61
11-27-2019