Homewerks AQUEOUS 15-U42-WNCH-AD Manual

Two handle laundry tub faucet

Advertisement

Quick Links

TWO HANDLE LAUNDRY
TUB FAUCET
MODELS
15-U42-WNCH-AD – Chrome
15-U42-WNCH-B – Chrome

PACKAGE AND HARDWARE CONTENTS

PART
DESCRIPTION
A
Faucet body
D
Mounting nuts

SAFETY INFORMATION

Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING
• Protect your eyes with safety glasses when cutting or soldering water
supply lines.

PREPARATION

Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents. If any
part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Adjustable Wrench, Groove
Joint Pliers, Pipe Wrench, Phillips Head Screwdriver, and Supply Lines.
Homewerks Worldwide, LLC • Lincolnshire, IL 60069 • www.homewerksww.com
QUANTITY
1
2
CAUTION
• If you solder the joints during installation of the faucet, the seats,
• Cover the sink drain to avoid losing parts.
Installations may vary depending on how the previous faucet was
installed. Supplies necessary for the installation of the faucet are not
all included; however, they are available wherever plumbing supplies
are sold.
Prior to beginning installation, turn off the hot or cold water lines, then
turn on the old faucet to release built-up pressure. When installing the
new faucet, hand tighten the connector nuts. DO NOT OVERTIGHTEN.
Connections that are too tight will reduce the integrity of the system.
A
cartridges, and washers must be removed before using a flame
or the warranty will be voided on these parts.
US
B
10-16-2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AQUEOUS 15-U42-WNCH-AD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Homewerks AQUEOUS 15-U42-WNCH-AD

  • Page 1 DO NOT OVERTIGHTEN. Joint Pliers, Pipe Wrench, Phillips Head Screwdriver, and Supply Lines. Connections that are too tight will reduce the integrity of the system. Homewerks Worldwide, LLC • Lincolnshire, IL 60069 • www.homewerksww.com 10-16-2013...
  • Page 2 PRODUCT SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS Max. Flow Rate: 2.2 GPM (8.3 LPM) at 60 PSI Washerless cartridges ASME A112.18.1/CSA B125 Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces NSF 61-9 Chrome finish Total weight of item: 1.648 lbs. ASSEMBLY INSTRUCTIONS 1.
  • Page 3 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Leaks underneath Bonnet has come loose or 1. Move the handle to the OFF position. Unscrew the handle screw and remove the handle. handle. O-ring on cartridge is dirty 2. Tighten the bonnet by turning it clockwise. Move the cartridge stem to the on position. The or twisted.
  • Page 4 REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-877-319-3757, 8 a.m. - 5 p.m., CST, Monday - Friday. PART DESCRIPTION PART # RP30024 Hose adapter assembly RP30021CH Aerator assembly Spout nut RP56034CH Washer RP64085 RP60008 O-ring RP70106 Spout ring/clip RP10020...

This manual is also suitable for:

Aqueous 15-u42-wnch-b

Table of Contents