Frequently Asked Questions - PowerXL ES2416S 05 Owner's Manual

Frequently Asked Questions

1. Why is my iron not heating up?
Check that the main plug is properly inserted or
try plugging the iron into a different socket. The
temperature control may be set too low.
2. What is the right temperature for my clothes?
It is essential to select the right ironing
temperature. The thermostat dial contains
international markers with dots corresponding to
three ironing temperatures.
Use the marker with 1 dot for synthetic fabrics.
Use the marker with 2 dots for wool and fabric.
Use the marker with 3 dots for cotton and linen.
3. Why did my iron smoke on the first use?
When heating your iron for the first time, you may
notice a small amount of odor and smoke. This is
harmless residue from the manufacturing process
that will quickly burn off and disappear.
4. Can I fill the iron with water when it is
plugged in?
No, you must always unplug the iron before filling it.
5. Why is my iron leaking from the soleplate
when I fill it?
Always set your iron to the "No Steam" (
function before you start to fill.
6. What is the vertical steam function used for?
How do I use it?
This function allows you to iron fabrics on a hanger.
Set the iron temperature to the maximum position.
Leave the item on a hanger and gently pull the
fabric with one hand. Press the Steam Blast Trigger
repeatedly and move the iron from top to bottom.
NOTE: Never use the vertical steam function on an
item being worn by anyone.
7. What water should I use in the iron?
Use tap water to fill the Water Tank. In hard water
areas, you can use a mixture of 50% tap water
and 50% distilled or demineralized water. Do not
use chemical additives, scented substances, or
decalcifiers in the water.
8. How can I avoid scratching the soleplate
of my iron?
To avoid damaging the soleplate, always place
your iron on its heel rest of its base, avoid ironing
over abrasive item (buttons, zippers, etc.), and
never clean your iron's soleplate with abrasive or
metallic pads.
9. Can I use my steam iron for dry ironing?
Yes, and you do not need to fill the tank with
water. Set the Steam Selector to off and set the
temperature to suit the type of material. Once
the iron has cooled down at the end of an ironing
session, wipe the soleplate and around the steam
holes to remove any burned fibers that may have
collected around the steam holes.
10. How do I prevent water drips on
my fabric?
Do not use the Steam Blast Trigger intensively.
Wait a few seconds between each use. The
temperature button much be placed within the
Steam range (between 2 dots and MAX). Use
steam only when the iron is hot (the light must
be off).
11. What should I do to maintain my
)
iron correctly?
After use, empty the tank, close the steam control,
set the thermostat to minimum, and stand the
iron upright or place it on the base. Use a damp
soft cloth to wipe your iron and never use
cleaners or solvents.
12. Can the iron be used while charging on
the base?
Yes. Please lock the iron into the base before
using and follow the instructions before pouring
water into the Water Tank.
PowerXL Cordless Iron & Steamer Deluxe | Model: ES2416S_05
13