Steam Ironing - PowerXL ES2416S 05 Owner's Manual

Steam Ironing

Filing the Tank
that the plug is disconnected from the
1. Check
outlet.
2. Detach and move the iron clear of the base
before filling.
3. Move the Steam Selector (A) to
4. Open the Water Tank Cap (B).
5. Raise the tip of the iron to help the water enter
the opening without overflowing.
6. Slowly pour the water into the tank using the
Water Jug and take care not to fill over the
maximum level (about 370 ml) indicated by
"MAX" on the tank.
7. Close the Water Tank Cap.
Using the Steam Function
1. Follow the steps to "Filling the Tank" and then
set the iron in the vertical position. Wipe away
any water near the Water Tank Cap.
2. Connect the iron to the base and insert the plug
into a power outlet.
3. Use the Temperature Control Dial (C) to select
the desired temperature. To use steam, the
temperature must be set between dot position
two and dot position three. If using the iron
while connected to the base, ensure that
the Base Lock Switch (D) is in the locked
position. If using the iron cordlessly, first place
the iron vertically on the base and wait for
it to reach the desired temperature before
removing it from the base.
4. Set the Steam Selector to the desired position.
10
PowerXL Cordless Iron & Steamer Deluxe | Model: ES2416S_05
.
5. When the Temperature Indicator Light (E)
A
B
C
turns off, you can begin to iron. If the iron is
being used cordlessly or is no longer lit,
you can iron for about 30 seconds after the
Temperature Indictor Light darkens. Then,
place the iron on the Base to reheat the iron.
D
E