Table of Contents
Advertisement
EN
GB
INSTRUCTIONS FOR
INSTRUCTIONS FOR
MOUNTING DOOR
MOUNTING DOOR
Drill holes in the door
using the cardboard
Drill holes in the door
template as indicated in
using the cardboard
Fig. 1 to mount the hinges
template as indicated in
and closure magnet in
Fig. 1 to mount the hinges
the right or left-hand
and closure magnet in
position according to
the right or left-hand
your requirements. The
position according to
position of the hinges
your requirements. The
refers to the upper edge.
position of the hinges
refers to the upper edge.
Screw the hinges in place
with the 4 screws (A).
Screw the hinges in place
Screw on the magnet (B)
with the 4 screws (A).
with screw (C).
Screw on the magnet (B)
with screw (C).
Mount the plate (D) in the
right or left-hand position,
Mount the plate (D) in the
according to your
right or left-hand position,
requirements. Place the
according to your
rubber washers under the
requirements. Place the
plate and screw in place
rubber washers under the
with screw (G).
plate and screw in place
Snapmount cap (H) in the
with screw (G).
lower position.
Snapmount cap (H) in the
lower position.
Advertisement
Table of Contents
