Motorola MTM800 User Manual page 50

All manuals and user guides at all-guides.com
Setting Time & Date
Time and date are synchronized by the infrastructure. When not
within the infrastructure signal range you can set the values
manually.
• To set time press Menu button and select Setup > Time & Date
> Set > Set Time. Enter time using navigation key and/or
numeric keypad.
• To set date press Menu button and select Setup > Time & Date
> Set > Set Date. Enter date using navigation key and/or
numeric keypad.
• To automatically set date and time press Menu button and select
Setup > Time & Date > System Update. Pick one out of three
options accordingly to your needs:
• Off – System Update is turned off
• Time only – time is updated
• Time & Offset – the time is updated automatically according
to the current time zone when user is in TMO mode. In DMO
mode the radio is using its internal clock.
Template Names
User is able to give the title of the template by his preference. If no
default name is given.
Toggling between Talkgroups
You can switch the last two talkgroups in any mode and between
the modes. For example when you are in TMO and would like to
switch to the last Talkgroup that was in DMO, press and hold One
Touch Button. It works in both ways and in one mode. After
powering off, the radio remembers your two last Talkgroups.
48