Advertisement
Wet Cleaning (continued)
After-Cleaning Care
1. Squeeze tank release latches
and pull to remove tank.
4. Rinse suction lens and
brush.
7. Push brush into opening
until it clicks into place.
WARNING
before performing maintenance or troubleshooting.
2. Release removable suction
lens by raising latch at top and
pulling outward.
5. With drain plug open, rinse
tank by running water through
front and out through plug
opening.
Note: Plug remains attached
to tank.
8. Hook bottom of lens to
machine and rotate closed
until latch clicks into place.
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect from charger
3. Empty dirty water tank
prior to removing brush. Grip
tab on brush and gently pull
away.
6. Allow tank to dry. Push plug
back into tank.
9. Press dirty tank back into
machine until it clicks into
place.
BISSELL.com 7
Advertisement
