Advertisement
Wet Cleaning (continued)
Installing the Deep Cleaning Attachment
1. Make sure machine is OFF. Remove the dry
vacuum attachment. Squeeze latches and pull
to remove.
Spot Cleaning Carpet & Upholstery
1. Flip formula tank cap to
open and add formula. Click
cap back into place.
4. Scrub area with brush,
keeping nozzle flat on surface,
as shown.
Tip: Turn machine off while
scrubbing to allow formula to
treat the stain.
NOTICE
Use of cleaning formulas which contain lemon or pine oil may damage this appliance. Chemical spot cleaners
or solvent-based soil removers also should not be used. These products may react with the plastic materials used in your cleaner,
causing cracking or pitting.
2. Press deep cleaner attachment back until it
clicks into place.
2. Turn machine ON by
pressing power button.
Suction
Channel
5. For maximum suction, firmly
press suction channel down on
surface.
Note: Area may be damp to
touch after cleaning.
3. Tilt machine forward
towards stain and press spray
button to dispense formula.
6. Empty dirty water tank
before water reaches "MAX
FULL" line.
CONTINUED ON NEXT PAGE
BISSELL.com 5
Advertisement
