Related Manuals for SMART MOD 7a
Summary of Contents for SMART MOD 7a
- Page 1 Devices, Inc. MOD 7a Seven Channel Plus Overhead Channel Cinema Stereo Processor With Circle Surround Analog Matrix NSTALLATION AND PERATION ANUAL...
- Page 2 MOD 7a STEREO PROCESSOR is a trademark of SRS Labs, Inc. Copyright 2006 by SMART Devices, Inc. Circle Surround technology is incorporated 101 Hollywood Hills Road under license from SRS Labs, Inc. Clarkesville, GA 30523-4452 Surround EX is a trademark of Dolby Labs, San Francisco. CA...
- Page 3 INSTALLATION & OPERATION...
- Page 4 MOD 7a STEREO PROCESSOR...
- Page 5 INSTALLATION & OPERATION...
- Page 6 MOD 7a STEREO PROCESSOR Carefully (Factory setting) (Factory setting) (Factory setting) (Factory setting) Rear Left Corner of Main Board...
- Page 7 INSTALLATION & OPERATION (Factory setting) Right Rear of Main Board (Factory setting) Left of Matrix Board...
- Page 8 MOD 7a STEREO PROCESSOR...
- Page 9 INSTALLATION & OPERATION...
- Page 10 MOD 7a STEREO PROCESSOR MOD 7 rear panel Do NOT plug a “live” power supply into the back of the MOD 7a processor!
- Page 11 INSTALLATION & OPERATION terminal must be tied to ground to activate Projector Two. It is not a pulse-toggled input. Connecting the MOD 7a to a Reverse Scan terminal is grounded. The...
- Page 12 MOD 7a STEREO PROCESSOR 10, 16, 18, 20, 22, & 24 Ground...
- Page 13 INSTALLATION & OPERATION Figure 6. Low crosstalk between channels...
- Page 14 MOD 7a STEREO PROCESSOR Figure 7. Pink noise in X/Y mode on the oscilloscope.
- Page 15 INSTALLATION & OPERATION...
- Page 16 MOD 7a STEREO PROCESSOR ISO Cinema Playback Standard states that octave bands should be tuned for flat response to 2 kHz, with a 3 dB/octave rolloff above 2 kHz.
- Page 17 INSTALLATION & OPERATION...
- Page 18 MOD 7a STEREO PROCESSOR...
Need help?
Do you have a question about the MOD 7a and is the answer not in the manual?
Questions and answers