Box Cooling Control; Heater Control; Figure 26 Box Cooling Control Screen - Innovative Technology PureLab HE Glovebox User Manual

Control Panel Functions
Turning the freezer on while the Glovebox contains room atmosphere will result in the
condensation of moisture preventing the Glovebox from achieving optimum atmosphere
conditions, i.e. preventing the system from being able to reach 1 ppm moisture content.

4.3.12 Box Cooling Control

This feature is only displayed if your system has been factory-fitted with Box Cooling.
Pressing the Box Cooling Control button brings up the following screen (Figure 26):

Figure 26 Box Cooling Control screen

Current
Temp
Set point
Range
Status

4.3.13 Heater Control

This feature only displays if your system has been factory-fitted with a heated Antechamber.
Pressing the Heater Control button brings up the following screen (Figure 27):
36 of 80
Indicates the actual temperature (°C) inside the Glovebox.
Allows the temperature inside the Glovebox to be adjusted.
The deviation +/- °C from the set point.
Turns the Box Cooling On and Off.
Pure_Lab_Manual Rev 6_4-14-2015.docx