Table of Contents
Advertisement
Overview
Optics Type
10G DAC copper
10G DAC CU active
10G AOC
The following table lists the supported transceivers for the fixed ports on the Secure Firewall 3130 and 3140,
and the FPR3K-XNM-8X25G network module.
Table 6: Supported 25-Gb SFP Transceivers
Optics Type
25G-SR
25G-CSR
25G-LR
25G DAC copper
25G AOC
The following table lists the supported transceivers for the FPR-X-NM-4X40G network module.
Table 7: Supported 40-Gb SFP Transceivers for FPR-X-NM-4X40G
Optics Type
40G-SR4
40G-SR4-S
40G-CSR4
40G-SR-BD
40G-LR4-S
40G-LR4
40G-LR4L
40G-CU
PID
SFP-H10GB-CUxM
SFP-H10GB-ACUxM
SFP-10G-AOCxM
PID
SFP-25G-SR-S
SFP-10/25G-CSR-S
SFP-10/25G-LR-S
SFP-H25G-CUxM
SFP-25G-AOCxM
PID
QSFP-40G-SR4
QSFP-40G-SR4-S
QSFP-40G-CSR4
QSFP-40G-SR-BD
QSFP-40G-LR4-S
QSFP-40G-LR4
WSP-Q40GLR4L
Cisco QSFP-H40G-CUxM
Cisco Secure Firewall 3100 Series Hardware Installation Guide
Supported SFP/SFP+/QSFP+ Transceivers
Comments
Length 1, 1.5, 2, 2.5, 3, 4, 5 m
Note
You must set the link
partner transmit
strength to 400mV or
greater.
Length 7, 10 m
Length 1, 2, 3, 5, 7, 10 m
Comments
—
Dual rate, longer reach
Dual rate
Length 1, 1.5, 2, 2.5, 3, 4, 5 m
Length 1, 2, 3, 4, 5, 7, 10 m
Comments
—
Ethernet only
300 m with OM3
LC connector
Ethernet only
Ethernet and OTU3
LR4 Lite, up to 2 km
QSFP to QSFP copper direct-attach
cables (passive); length 1, 3, 5 m
31
Advertisement
Table of Contents
