Advertisement
Auto Recording Mode
After entering settings, slide the power switch to ON to enter auto recording mode. The
motion indicator will flash red for about 5 seconds, after which the camera will start working.
It will automatically take pictures or record videos when a person or animal enters into the
area of the PIR sensor.
Caution: To avoid potential false triggers due to temperature and motion disturbances, do
not aim the camera at a heat source (e.g. the sun, heated stone or metal) and remove
nearby tree branches and twigs. The ideal direction to aim at is an open place to the north
without nearby heat sources.
Note:
Generally, it is recommended to place the camera at a height of 1–2 metres.
Advanced Settings
Camera
Resolution
Sequence
ISO
Delay
Camera ID
Video
Resolution
Video length
Record audio
Setup
Mode
Language
Time-lapse
TV mode
Date/Time
Timer
Password
Format
Default settings
Version
Advertisement
