Page 2
QUESTIONS? Give us a chance to help, we’re just a click away Electrohome.com/videos Electrohome.com/resources Electrohome.com/support Electrohome.com/contact Don’t forget to register your product with us! Electrohome.com/registration Scan this QR code in your smartphone camera app to go directly to the support resources for this product.
INTRODUCTION Since 1907 Electrohome has been developing high fidelity audio products & has been welcomed into homes for generations. One thing that remains the same in our more than 100 year history is our unmatched dedication to design and premium craftsmanship.
PRODUCT INFORMATION Front Woofer Back Control Knob • Press – Change Source • Hold – Turn On/Off • Turn – Adjust Volume Bluetooth® Pairing Reset LED Indicator RESET RESET Aux In RCA IN RCA IN RCA In To Passive Speaker To Passive Speaker Power Input AC 120V~60Hz...
FIRST TIME SETUP Position the speakers with the Active Speaker on the right and the Passive Speaker on the left. Passive Speaker Active Speaker NOTE: If placing the speakers in a cabinet or on a shelf, position the front of the speakers as close as possible to the front edge of the shelf for optimum audio performance.
TURNING ON/OFF UNIT Press the Control Knob to turn on the unit. Hold to turn off the unit. RCA INPUT Connect an RCA cable to your Connect the other end of the source device (Turntable, RCA cable to the back of the Smartphone, Computer…).
BLUETOOTH PAIRING ® Press the Control Knob to Pair to “Electrohome EB10” on select the Bluetooth® input your source device. (Blue LED). Settings Bluetooth MY DEVICES Electrohome EB10 RESET RCA IN To Passive Speaker AC 120V~60Hz Note: Unit will attempt to auto-pair to the last paired device.
AUX INPUT Connect the AUX cable to your Connect the other end of the source device (Smartphone, AUX cable to back of the Active Computer…). Speaker. RESET RCA IN To Passive Speaker AC 120V~60Hz Note: Cable not included. Press the Control Knob to select Adjust volume on EB10 as well as the AUX input (Yellow LED).
Note: The Electrohome EB10 will only auto-pair to the last device that it was connected to. How do I change the source on my Electrohome EB10? Press the Control Knob.
IMPORTANT SAFETY INSTRUCTIONS TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Page 11
PRÉCAUTIONS DE SÉCRITÉ IMPORTANTES A LIRE EN PREMIER AFIN D’ÉVITER TOUT RISQUE DE FEU OU DE RISQUE ÉLECTRIQUE, N’UTILISEZ PAS CETTE PRISE AVEC UNE RALLONGE, UN RÉCEPTACLE OU UNE AUTRE PRISE À MOINS QUE LES LAMES NE PUISSENT ÊTRE TOTALEMENT INSÉRÉES POUR ÉVITER L’EXPOSITION DES LAMES. POUR ÉVITER TOUT RISQUE DE FEU OU DE RISQUE ÉLECTRIQUE, N’EXPOSEZ PAS CE MATÉRIEL À...
Warranty Exclusions Electrohome products are warrantied for parts and labor for one year from date of original purchase, and are subject to the terms and conditions of the warranty. Any refurbished products that are discontinued hold a 90 day warranty from the date of original purchase.
Need help?
Do you have a question about the Huntley EB10 and is the answer not in the manual?
Questions and answers