Page 2
INTRODUCTION Since 1907 Electrohome has been developing high fidelity audio products & has been welcomed into homes for generations. One thing that remains the same in our more than 100 year history is our unmatched dedication to design and premium craftsmanship.
TABLE OF CONTENTS What’s Included ..........................3 Product Information ........................4 First Time Setup ..........................5 Turning On/Off Unit ........................6 Source Selection .........................6 EQ Adjustment ..........................7 RCA Input ............................7 Bluetooth Pairing........................8 Aux Input ............................9 Frequently Asked Questions ....................10 Troubleshooting ........................10 Specifications ..........................11 Warranty Information ......................
PRODUCT INFORMATION Remote Control Power On/Off Volume Up/Down Bass Up Bass Down Mute Tap: Play/Pause Hold: Bluetooth Reset Previous/Next Track Source Treble Up 10. Treble Down 11. Reset EQ Front & Back Panel 12. Tweeter 13. Woofer 14. Control Knob 15.
FIRST TIME SETUP Position the speakers with the Active Speaker on the right and the Passive Speaker on the left. Passive Speaker Active Speaker NOTE: If placing the speakers in a cabinet or on a shelf, position the front of the speakers as close as possible to the front edge of the shelf for optimum audio performance.
TURNING ON/OFF UNIT Press on the Remote to turn Press the Control Knob to turn on the unit on/off. the unit. Hold to turn off the unit. VOL + VOL - TREBLE BASS VOL + SOURCE SELECTION VOL - Press on the Remote to cycle Press the Control Knob to cycle through the audio inputs.
AC 120V~60Hz Note: The included RCA to Aux cable can also be used. Press the Control Knob to select Adjust volume on EB30 as well as the RCA input (Green LED). source device. IMPORTANT: When connecting a turntable, a phono preamplifier must be used. ...
If your device cannot find playback on your source device “Electrohome EB30”, you can reset Bluetooth® pairing: Note: Adjust Volume on the source device as well as the EB30. • Press and hold for 3 seconds PAIR to reset Bluetooth® pairing.
AUX cable to back of the Active Computer…). Speaker. RESET RCA IN AC 120V~60Hz Note: The included RCA to Aux cable can also be used. Press the Control Knob to select Adjust volume on EB30 as well as the AUX input (Yellow LED). source device.
What is “auto-pairing” and how does it work? Auto-pairing is a convenient connection feature. If the connected Bluetooth®- enabled device leaves the connection range of the EB30 and returns at a later time, the device will automatically connect. If the device’s Bluetooth®...
Poor Audio • Ensure the colored wires are connected to the corresponding colored binding posts on each speaker • Test with another audio source device to determine source of issue • Move the speakers away from the wall if there is too much bass, or closer if not enough Poor Audio •...
Warranty Exclusions Electrohome products are warrantied for parts and labor for one year from date of original purchase, and are subject to the terms and conditions of the warranty. Any refurbished products that are discontinued hold a 90 day warranty from the date of original purchase.
Page 13
Cet appareil est conforme à FCC et IC l’exposition aux rayonnements limites fixées pour un environnement non contrôlé. Cet appareil doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet transmetteur ne doit pas être co-situé ou opérant en liaison avec toute autre antenne ou transmetteur.
Need help?
Do you have a question about the EB30 and is the answer not in the manual?
Questions and answers