TURNING ON/OFF UNIT
Press the Control Knob to turn on the unit. Hold to turn off the unit.
RCA INPUT
1.
Connect an RCA cable to your
source device (Turntable,
Smartphone, Computer...).
3.
Press the Control Knob to select
the RCA input (Green LED).
IMPORTANT: When connecting a turntable, a phono preamp must be used. Pre-
amps are often built into turntables but can also be standalone devices. If your
turntable has extremely low volume, a preamp may be needed.
Note: Cable not included
R
RESET
AUX
IN
L
RCA IN
To Passive Speaker
AC 120V~60Hz
2.
Connect the other end of the
RCA cable to the back of the
Active Speaker.
RESET
AC 120V~60Hz
4.
Adjust volume on EB10 as well as
source device.
R
AUX
IN
L
RCA IN
To Passive Speaker
R
RESET
AUX
IN
L
RCA IN
To Passive Speaker
AC 120V~60Hz