Table of Contents
Advertisement
3. Remove the internal film.
4. Open the door. Remove the polystyrene piece
from the door seal and all the items from the
drum.
5. Put one of the polystyrene packaging elements
on the floor behind the appliance. Carefully put
down the appliance with the rear side on it.
Make sure not to damage the hoses.
6. Remove the polystyrene protection from the
bottom. Pull up the appliance in vertical
position.
8
1
2
7. Remove the power supply cable and the drain
hose from the hose holders.
8. Remove the three bolts. Use the key supplied
with the appliance. Pull out the plastic spacers.
9. Put the plastic caps in the holes. You can find
these caps in the user manual bag.
We recommend that you keep the
packaging and the transit bolts for any
movements of the appliance.
.
INFORMATION FOR INSTALLATION
Positioning and levelling
Adjust the appliance correctly to prevent vibration,
noise and movement of the appliance when it
operates.
1. Install the appliance on a flat hard floor. The
appliance must be levelled and stable. Make sure
that the appliance does not touch the wall or other
units and there is air circulation below the
appliance.
Advertisement
Table of Contents
