Table of Contents
Advertisement
Access Codes
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions,
such as setting the maximum cost of a call.
These functions are available if supported by
your SIM card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see page 147 (Menu
7.6.8).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2),
supplied with some SIM cards, is required to
change a disabled PIN2. If you lose the code,
contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press
the OK soft key.
3. When the Confirm PIN2 message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your
service provider for a new card.
188
Barring Password
A 4-digit barring password is required when you
use the Call Barring function. You can obtain
the password from your service provider when
you subscribe to this function.
You can change this password in the Call
Barring menu (Menu 9.2). See page 165 for
further details.
Access Codes
189
Advertisement
Table of Contents
