Table of Contents
Advertisement
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, push the slider up/down or switch
your phone on/off.
• alert tone made every minute during a call,
when you make an error or when your call is
connected to the system.
Notes:
• You can quickly enter the Sound Settings menu
by pressing the Up key in Idle mode.
• When the phone is in Silent mode (see page
32), you cannot change the sound settings.
Ring Tone
(Menu 6.1)
Note: You can quickly enter this menu by pressing
and holding the Up key in Idle mode.
This menu allows you to select a ring melody.
You can choose between many different
melodies. If you have downloaded sounds from
the Internet or EasyGPRS programme, you can
use them in this menu.
Ring Volume
(Menu 6.2)
This menu allows you to adjust the ring volume
to one of five levels.
Use the Up and Down keys or the Volume keys
on the left side of the phone to increase or
decrease the volume.
130
Alert Type
(Menu 6.3)
This menu allows you to specify how you are to
be informed of incoming calls and alarms you
set.
The following options are available:
Light Only: the service light flashes; the phone
neither rings nor vibrates.
Melody: the phone rings using the selected ring
or alarm melody.
Vibration: the phone vibrates but does not ring.
or alarm melody.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone
(Menu 6.4)
This menu allows you to select the tone that the
phone sounds when you press a key.
To turn the sound off, select Off.
Sound Settings
131
Advertisement
Table of Contents
