Pin2; Puk2; Barring Password - Samsung SGH-X480 Manual

Access codes

PIN2

The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see page 144 (Menu 9.5.8).

PUK2

The 8-digit PUK2 (PIN Unblocking Key 2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key or the
key.
2. Enter a new PIN2 of your choice and press the
OK soft key or the key.
3. When the Confirm PIN2 message displays,
enter the same code again and press the OK
soft key or the key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
152

Barring password

A 4-digit barring password is required when you use
the Call Barring function. You can obtain the
password from your service provider when you
subscribe to this function.
You can change this password in the Call barring
menu (Menu 3.2). See page 62 for further details.
Access codes
153