Table of Contents
Advertisement
Text Messages
Setting x (where x is the setting group
number): each group has its own sub-menu.
Service Centre: allows you to store or change
the number of your message centre, which is
required when sending messages. You must
obtain this number from your service provider.
Default Destination: allows you to store the
default destination number. The number
automatically displays on the Destination screen
when you create a message.
Default Type: allows you to set the default
message type to Text, Fax, Email or Paging.
The network can convert the messages into the
selected format.
Default Validity: allows you to set the length of
time your text messages are stored in the
message centre while attempts are made to
deliver them.
Setting Name: allows you to give a name to the
setting group currently being defined.
Common Setting: The following options are
available:
Reply Path: allows the recipient of your message to
send you a reply through your message centre, if
your network supports this service.
Delivery Reports: allows you to activate or
deactivate the report function. When this function
is activated, the network informs you whether or
not your message has been delivered.
Bearer Selection: allows you to choose either GSM
or GPRS, depending on your network.
86
Delete All
(Menu 1.6)
This menu allows you to delete all of the text
messages in each message box. You can also
delete all of your messages at one time.
To
select a message box
to clear
place a check mark
remove a check mark
delete the marked
messages
When a confirming message displays, press the
Yes soft key to confirm.
Memory Status
(Menu 1.7)
This menu shows how many messages are
currently stored in the SIM, Phone and CB (cell
broadcast) memories.
Text Messages
Press the
Up or Down key.
To delete all of your
messages, select All
Messages.
Mark soft key.
Unmark soft key.
Delete soft key.
87
Advertisement
Table of Contents
