Additional Resources - Allen-Bradley PowerFlex 70 User Manual

Preface

Additional Resources

6
These documents contain additional information concerning related products
from Rockwell Automation.
Resource
PowerFlex 70 Adjustable Frequency AC Drive Installation
Instructions, publication 20A-IN009
PowerFlex 70 and 700 Reference Manual - Vol. 1,
publication PFLEX-RM001
PowerFlex 70 Enhanced Control and 700 Vector Control
Reference Manual, publication PFLEX-RM004
DriveGuard Safe-Off Option (Series B) for PowerFlex 40P and
PowerFlex 70 AC Drives, publication
PowerFlex Comm Adapter Manuals, publication
20COMM-UM...
PowerFlex Dynamic Braking Resistor Calculator Application
Technique, publication PFLEX-AT001
Wiring and Grounding Guidelines for Pulse Width Modulated
(PWM) AC Drives, publication DRIVES-IN001
Industry Installation Guidelines for Pulse Width Modulated
(PWM) AC Drives Application Technique,
publication DRIVES-AT003
Preventive Maintenance of Industrial Control and Drive
System Equipment, publication DRIVES-TD001
Safety Guidelines for the Application, Installation, and
Maintenance of Solid State Controls, publication
Guarding Against Electrostatic Damage,
publication 8000-4.5.2
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
Product Certifications website,
http://ab.rockwellautomation.com
You can view or download publications at
http://www.rockwellautomation.com/literature/. To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
For Allen-Bradley® drives technical support, see
on the back cover of this manual.
Rockwell Automation Publication 20A-UM001P-EN-P - February 2018
Description
Provides the five basic steps that are needed to install
and perform a basic startup of the PowerFlex 70 drive.
Provides detailed information for specifications and
dimensions, operation, and dynamic brake selection for
the drive.
Provides detailed drive information including
operation, parameter descriptions, and programming.
Provides information for the installation and operation
PFLEX-UM003 of the DriveGuard Safe Torque Off option.
Provides information for the installation and operation
of the various communication protocol adapters
available for the drive.
Provided information for determining dynamic braking
requirements and evaluating resistors for dynamic
braking.
Provides the basic information that is needed to
properly wire and ground Pulse Width Modulated
(PWM) AC drives.
Provides basic information for enclosure systems and
environmental/location considerations (to help protect
against environmental contaminants), and power and
grounding considerations that are needed to properly
install AC drives.
Provides a checklist to use as a guide for performing
preventive maintenance on industrial control and drive
systems.
Describes some important differences between
SGI-1.1 solid-state equipment and hard-wired
electromechanical devices
This data sheet explains the causes of electrostatic
damage (ESD), and how you can guard against its
effects.
Provides general guidelines for installing a Rockwell
Automation industrial system.
Provides declarations of conformity, certificates, and
other certification details.
Rockwell Automation Support