Getting Started; Inserting A Memory Card; Mounting The Dash Cam - Car and Driver EAGLEEYE CDC-570 User Manual

2. Getting started

2-1 Inserting a memory card

Class 10 or higher TF memory card must be used with a storage capacity of 8GB ~ 32GB.
It is strongly recommended that minimum 8GB memory card is used for HD recording.
Inserting a TF card
1. As shown in the illustration, hold the edge of the TF memory card, and insert the TF
memory card into the slot with the label facing up and push until you hear a click.
Make sure the label of the
TF memory card are facing
the same direction as the
display.
To remove the TF memory card, gently push on the edge of the card in until it clicks out
from the slot, then pull out the card.
Note
Do not apply excessive force to the TF memory card or attempt to insert it in the
wrong direction. This may cause damage to the TF memory card and the card slot.
Note

2-2 Mounting the Dash Cam

1. Place the mount so it is aligned with the mounting slot, and push it in until it clicks into
place. Then remove the protective film from the camera lens and protective film from the
suction cup.
-
4 EN