Trace heater Installation Enclosure as Power Box kit
Junction box with mounting stand
Max. workpiece
temperature mounting
stand
2
Max. trace heater entries
Terminals
Maximum circuit breaker
size
4
Power supply
Ambient temperature range
Min. installation temperature
Power supply cable
Service temperature at con-
ductor
5
Ingress Protection
Connection Technology (CAK)
Maximum withstand tem-
perature / max. service tem-
perature end seal
Min. installation tempera-
ture
Connected
Trace
trace
heater
heater type
rated
power out-
put [W/m]
HSB+
10, 15, 30,
45, 60
75
HTSB
10, 15, 30,
45, 60
75, 90
Maximum workpice temperature depending on the type of trace heater, used
2
On request
3
Protecting of all components of the branch circuit against over-current; choice depending on design parameters
4
For supply cable type selection, the permissible operating temperature at the conductor is to be observed with respect to the maximum ambient temperatue of the power box.
5
21-5400-7D0001/-
05/2023-EHT-466854
PBS-200-E
PBS-300-E
PBM-200-E
/-E10 / -E16
/-E10 / -E16
/-E10 / -E16
+240 °C
-
+240 °C
2
1
Spring clamp Ex e; 2x3
Spring clamp Ex e; 3x3
lines, 1x3 PE
32 A
T
Limitation of operating current (stady state) of trace
amb max
[°C]
heating circuit at T
PBS/PBM
+40
20
+55
18
+40
20
+55
18
+40
20
+55
18
+40
20
+55
18
Notice Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.