Table of Contents
Advertisement
Checklist customized entry port
For customized power entry port or capilliary tube entry, the following data are mandatory for type selection of:
Component:
Identification:
Manufacturer:
Type:
Identification:
Manufacturer:
Type:
Standards
IEC 60079-0:2017; IEC 60079-7:2017;
to comply:
IEC 60079-31:2013
IEC EN 60079-0:2018; EN 60079-7:2015 +
A1:2018;
EN 60079-31:2014
Type of protection:
Ex eb. Ex tb
Ambient tempera-
HSB+, HTSB: -55 °C to +70 °C
ture range:
Temperature ranges are also valid for earth lugs
with cord.
Degree of ingress
IP66 in accordance with IEC 60529
protection:
and IEC 60079-0
Grade of mechani-
High (7J)
cal risk:
Material
metal or plastic;
For nuts and gland, mounted together, the mate-
rial shall be equal for keeping the Grade of me-
chanical risk at High (7J).
Thread size:
M20x1.5; M25x1.5; M32x1.5
also suitable for nuts
For installation of selected components, the manufacturer's installation manual must be observed. Thus above mentioned advices may differ.
It must be added to the junction box documentation.
It is not allowed to add or manipulate drillings and threads at the BARTEC junction box.
For selecting type of Power supply cable, see chapter Technical Data.
Remarks:
________________________________________________________________________________________________________________________________
____________________________________
City/Date
NOTICE
Claims under warranty will not be considered if the check list is not filled in completely.
21-5400-7D0001/-
05/2023-EHT-466854
_____________________________________
Engineer
Name / Signature
Notice Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Power cable
Power entry blind
gland
plug
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
yes
yes
yes
yes
___°C to ___°C
___°C to ___°C
yes
yes
yes
yes
yes
yes
yes
yes
kind of material:
kind of material:
______________
______________
M ___x1.5
M ___x1.5
yes
yes
_____________________________________
Customer
Name / Signature
Breather device;
Capilliary tube
Drain device
cable gland
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
yes
yes
yes
yes
___°C to ___°C
___°C to ___°C
yes
yes
yes
yes
yes
yes
yes
yes
kind of material:
kind of material:
______________
______________
M ___x1.5
M12x1 only
yes
yes
Page 37 / 40
Advertisement
Table of Contents
