Channel Vision 6010 - Varifocal Bullet Camera Manual

Also See for 6010:

Specification sheet (2 pages)

Instructions (2 pages)

Table of Contents

Contents

1 Introduction
2 Features
3 Device Includes
4 Installation
5 Specifications
6 Documents / Resources
- 6.1 Download manual

Channel Vision 6010 - Varifocal Bullet Camera Manual

Introduction

The 6010 is a Varifocal Bullet Camera. Its 4-9mm varifocal lens and low light sensitivity make it ideal for CCTV installations with minimal ambient light where precise camera adjustments are needed. Typical applications include entry gates, driveways, patios, and backyards.

Features

Sony 1/3" Super HAD CCD sensor
420 TV lines of resolution
4-9mm varifocal lens
Works with 5040 illuminator for night viewing
Easy to install

Device Includes

Installation

Installation - Connections

Mount base
Connect camera and swivel mount
Connect wiring
Point camera and adjust the lens

Drill a hole for wiring to exit the wall or ceiling.
Attach the base of the swivel mount using the screws provided.
If necessary, attach the camera's video output to a coax extension that is long enough to reach your monitor or video distribution equipment.
If necessary, cut the connector off of the end of the power supply and splice in an extension using crimp-on connectors.
Mount the base to the ceiling.
Screw the swivel mount into the base (see diagram).
Point the camera body and adjust the lens view.

Specifications

Image Sensor:	Sony 1/3" Super HAD CCD
Picture Elements:	NTSC: 510x492
Resolution:	420 lines
S/N Ratio:	More than 46 dB
Min Illumination:	0.1 LUX
Electronic Shutter:	1/60s - 1/100,000s
Iris Control:	Automatic
White Balance:	Automatic
Gamma Characteristic:	0.45
Lens:	Varifocal, 4-9mm
Sync. System:	Internal
Power Requirements:	12VDC
Power Consumption:	120mA
Video Output:	1 Vp-p @ 75 ohms
Humidity:	RH 95% max.
Dimensions:	2.75" x 3.30" x 7.50" (70mm x 84mm x 190mm)
Operating Temp:	-10°C to 50°C (14°F to 122°F)