Table of Contents
Advertisement
BASIC OPERATIONS
Turning on the power
1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (AM or FM),
see pages 7 – 9.
To operate the CD player,
see pages 10 – 12.
3
Adjust the volume.
Volume level indicator
6
To increase the volume.
To decrease the volume.
Volume level appears.
4
Adjust the sound as you want
(see page 13.)
To drop the volume in a moment
Press
briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you rotate the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 15.
CAUTION on Volume Setting
CDs produce very little noise compared with other
sources. If the volume level is adjusted for the tuner,
for example, the speakers may be damaged by the
sudden increase in the output level. Therefore, lower
the volume before playing a disc and adjust it as
required during playback.
for more than 1 second.
Advertisement
Table of Contents
