Changing Greeting Message - Samsung SCH-370B Owner's Manual

Backlight: When you turn on your phone, the LCD display and
keypad light up. You can choose from Automatic, Always
OFF, or Always ON. In Automatic mode, the light goes
off automatically 8 seconds after the last button is pressed. (If
you use the phone with hands-free kit, the light is on from 5
P.M. to 7:59 A.M. on the following day.) In Always ON mode,
if you use the phone with hands-free kit, this light is always on;
if not, this mode operates the same as Automatic mode. If
you choose Always OFF mode, the light is always off. (If you
use the phone with hands-free kit, the light goes off
automatically 8 seconds after the last button is pressed.)
Call Time Display: If this feature is activated (ON mode), the
call time counter is automatically displayed when the phone is
connected to the system. You can check the call time during
telephone conversation. In OFF mode, you must activate the
call time display manually by pressing FCN and numeric button
1 while you are over the phone. To turn off the feature, press
FCN and 1 again.
The call charge starts to count when the call is actually
connected.
Present Time Display: If this feature is activated (ON mode),
the current time is displayed. In OFF mode, the current time is
not displayed. If you turn the phone on and off, or attach and
remove the battery in the analog mode, the current time
disappears.
Release Tone: When this feature is activated (YES mode), the
phone sounds a release tone when a call is released if the call
was made in CDMA mode. In NO mode, the phone does not
generate a release tone. See page 46.
Connect Tone: When this feature is activated (YES mode), the
phone makes a connect tone when your phone is connected to
the basestation system to make a call. In NO mode, the phone
does not generate a connect tone. See page 47.
68

Changing Greeting Message

This feature allows you to change the greeting
message displayed when you turn on the phone.
1. Press:
FCN
followed by
Numeric button 0
2. Enter the lock code.
The lock code is preset to 0000.
An asterisk ( ) is displayed for
each digit entered.
3. Press numeric button 1 to choose
'Greeting' function.
4. Enter new greeting message with the
number button marked with the
desired letter.
You can enter the greeting
message up to 12 digits.
Refer to page 28 for entering
letter with the number button.
5. Press STO.
S E N D E N D
CLR
1 2 3
.QZ ABC DEF
1
4 5 6
GHI JKL MNO
1
7 8 9
PRS TUV WXY
0
ALPH OPR LOCK
STO RCL FCN
PWR
S E N D E N D
CLR
1 2 3
.QZ ABC DEF
4 5 6
GHI JKL MNO
7 8 9
PRS TUV WXY
0
ALPH OPR LOCK
PWR 2 STO RCL FCN
INUSE SVC FM CDMA
G r e e t i n g ?
H K H U T C H I S O N
S E N D E N D
CLR
1 2 3
.QZ ABC DEF
4 5 6
GHI JKL MNO
7 8 9
PRS TUV WXY
0
ALPH OPR LOCK
PWR 4 STO RCL FCN
69